Mike, We currently do what you suggest with our QS850 product using our modified version of Linux 2.2.5 (QSLinux). We have a small (640K) "boot" area that contains the processor IPL+Kernel. The remainder of the FLASH we allocate as a FLASH Filesystem, and we run the Ext2fs filesystem along with E2cfs (compression). The /bin, /dev, /lib, /etc directories and files reside in the FLASH filesystem and are retrieved at boot time.
We are working to cleanup our source for distribution. I am hoping to have it ready for publication later this week. Please note that we developed our code "outside" the main linux directory tree. This was done to make it easier to fold these changes into future kernel releases. We are hoping that our code gets integrated into the main branch of the Linux Kernel by some good hearted soul, but we do not have the manpower to tackle that task at the moment. There are also other components that may be of interest. We have an HDLC/PPP driver for the SCCs. We have split Dan Malek's SCC/SMC uart driver into 2 parts (1 for SCC and one for SMC), but there is still more work to be done on it. We also have an ATM/UTOPIA driver, a driver for allocating and controlling the I/O ports of the MPC850, a watchdog driver, and other features worth looking at. To learn about the features of QSLinux you can visit qslinux.com. To learn about or QS850 product you can visit www.snmc.com. Regards, Daris A Nevil SiSIC Inc/Simple Network Magic Corporation Mike Coy wrote: > I've noticed that the size of my initrd is limited not by the size of my > flash, but by the amount of ram I have to decompress it into. > I would like to put a filesystem in the unused portion of my flash and read > it (read-only) without first copying it into ram. > I'm not entirely sure how to get at this filesystem, though. The only way > I've seen flash accessed is with the initrd at boottime. > Has anyone done this? > > The best that I can come up with is that the flash is probably mapped into > memory somewhere, and maybe I could fool the ramdisk code into reading a > pre-existant ramdisk at a given address. This didn't appear to be too > trivial at my first browse through the code, though. > What is the right way to get at data in flash? > > Thanks, > Mike > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
