Carlos,
You need to load u-boot using the following BDI2000 config file:
ftp://ftp.denx.de/pub/BDI2000/MPC8260ADS.cfg
u-boot itself needs to be configured with
make MPC8272ADS_config
before it is built.
The kernel needs to be configured with
make ads8272_config && make oldconfig
before it is built.
And most importantly you should read the user manual on
http://www.denx.de/wiki/DULG/Manual
It's a bit 8xx centric but most of it applies to the 82xx as well.
Alex
On Wed, 12 Apr 2006 18:22:33 -0700
Carlos Munoz <carlos at kenati.com> wrote:
> Hi all,
>
> I have a new Freescale 8272ADS board that I need to load uboot and
> linux on. I have read all the documentation that came with the board
> but unfortunately it doesn't explain how to bring up the board from
> scratch. Does anyone know what I need to do to load uboot and linux
> on this board ?
>
> Thanks,
>
>
> Carlos
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
