Hi Achim, I also have the problem with uart blocking. Could you please send me your changes to the driver so I can see if it works for me.
Best regards, Johan -----Original Message----- From: [EMAIL PROTECTED] [mailto:linuxppc-embedded-bounces at ozlabs.org] On Behalf Of Achim Machura Sent: maandag 10 oktober 2005 15:14 To: 'Tomasz Prochownik' Cc: Linuxppc-Embedded (E-Mail) Subject: AW: MPC5200,PSC in uart mode, receiving problem Hello Tomasz > blocks (there is no response in the console). perhaps we have the same problem a few times ago. When we connect devices on ttySx which have wrong level on the lines the uart stay in break mode. I have made some fixes on the psc-driver. With these fixes the uart works, but i don't know how efficient. (clear breakmode and clear buffer) If you want, i can send the code best regards achim _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded at ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded - - - - - - - DISCLAIMER- - - - - - - - Unless indicated otherwise, the information contained in this message is privileged and confidential, and is intended only for the use of the addressee(s) named above and others who have been specifically authorized to receive it. If you are not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this message and/or attachments is strictly prohibited. The company accepts no liability for any damage caused by any virus transmitted by this email. Furthermore, the company does not warrant a proper and complete transmission of this information, nor does it accept liability for any delays. If you have received this message in error, please contact the sender and delete the message. Thank you. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20051011/589c8126/attachment.htm
