In message <20051017075208.29624.qmail at webmail24.rediffmail.com> you wrote: > > I am using MPC862 with 64mb ram , with Denx 3.1.1 eldk > with linux-2.4.25 on my custom board. > on Uboot i use SMC2 as my seri > al console , when i load linux i use SCC4 as my serisl console , this is be > cuase i dont have any idea why my SMC2 is not working , it works fine on my > linux-2.4.18 kernel , > anyways thats not the problem ,
Yes it is. It is a major mistake to ignore one problem and to try to continue and then complain about other, later issues. Fix one problem at a time. Do not try to continue before fixing the console problem. > i am using r > amdisk_image.gz provided by eldk , and i have configured kernel wit intial > ramdisk support , i have attachec the config file below , and also the boot > ing messages in another file . as i chnages the console from smc2 to scc4 f > rom uboot to linux may be intial message is not clear , It is not only not clear, but unreadable. Like most of your message, btw. Please fix your mailer. > i always get ker > nel panic VFS unable to mount root fs , is there something else i need to d > o or i am missing very important configuartion , please throw some light Which exact boot arguments did you pass? You configure for a MBX board - is this *really* one of these old door stoppers? Try removing devfs support and CONFIG_CMDLINE_BOOL and CONFIG_CMDLINE from your configuration. Best regards, Viele Gr??e, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Everyting looks interesting until you do it. Then you find it's just another job. - Terry Pratchett, _Moving Pictures_
