Thanks for your kindly suggestion. I have found out the problem. Just do some modification as following:
$(MAKE) ARCH=ppc CROSS_COMPILE=powerpc-linux- -C /root/linux-2.6.12.3 M=$(PWD) modules Good Luck.!! _____ From: JohnsonCheng [mailto:[EMAIL PROTECTED] Sent: Friday, October 21, 2005 11:36 AM To: linux-ppc-embedded Subject: RE: How to make mudules on linux-ppc2.6.12 Dear Andy, Thanks your reply. But I am sorry that it doesn't work on my box. My kernel had been configured and compiled, and I also modify my Makefile as following: Obj-m := test.o All: $(MAKE) ARCH=ppc CROSS_COMPILE=powerpc-linux- -C /root/linux-2.6.12.3 SUBDIRS=$(PWD) modules The output message is the same as before, no error message and no test.ko module. Thanks, Johnson Cheng _____ From: JohnsonCheng [mailto:[EMAIL PROTECTED] Sent: Thursday, October 20, 2005 6:57 PM To: linux-ppc-embedded Subject: How to make mudules on linux-ppc2.6.12 Dear All, I just write a "hello world" module code, but I can't compile it for ppc2.6.12. My Makefile is list as following: obj-m := test.o all: make ARCH=ppc CROSS_COMPILE=powerpc-linux- -C /root/linux-2.6.12.3 SUBDIR=. modules When I run make, no error message output, but I find no test.ko modules. The output message is list as following: make ARCH=ppc CROSS_COMPILE=powerpc-linux- -C /root/linux-2.6.1 2.3 SUBDIR=. modules make[1]: Entering directory `/root/linux-2.6.12.3' CHK include/linux/version.h make[2]: `arch/ppc/kernel/asm-offsets.s' is up to date. Building modules, stage 2. MODPOST make[1]: Leaving directory `/root/linux-2.6.12.3' Do anyone can give me some help ? Thanks, Johnson Cheng -------------- next part -------------- An HTML attachment was scrubbed... URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20051021/f65ccca1/attachment.htm
