Hi linuxppc-embedded?
I have downloaded the Linux 2.6.14 from www.denx.de.I added
and modified the file and compile it as what I did on Linux 2.4.25 which was
also downloaded on www.denx.de. My board is base on MPC 857 ,and it goes well
in Linux 2.4.25 . My bootloader is U-Boot 1.1.3 which goes well too. But when I
bring up the Linux 2.6.14 ,I only got the information as follow :
## Booting image at ffc40000 ...
Image Name: Linux-2.6.14
Created: 2005-11-17 7:11:42 UTC
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 678170 Bytes = 662.3 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at ffd00000 ...
Image Name:
Created: 2005-11-09 9:28:27 UTC
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 1564369 Bytes = 1.5 MB
Load Address: 00c00000
Entry Point: 00c00000
Verifying Checksum ... OK
Loading Ramdisk to 00e3e000, end 00fbbed1 ... OK
And there is nothing output ,I thought that it was serial port fault . I
checked my Linux configuration ,but found nothing .
How to make the linux 2.6.14 well on my board ??
Any help on this would be greatly appreciated. Thanks for your patience.
??zjznliang
????zjznliang_popo at 163.com
??????2005-11-17
