BTW, I just tested modifying the images with mkbugboot, both with the vmlinux.gz and zImage.prep - will not boot image off the network. Will not boot image with RB; V (load from ROM/RAM verbose) if loaded at $10000 address either (both bugboot images).
This always leads to Alignment errors, while trying to boot the zImage.prep off the net directly does not lead to errors but to a system hang. I've seen evidence on the list, that the netboot stuff works - most people seem to have problems transplanting a working configuration into Flash, but not with netbooting, therefore leading to little useful advice on this in the list. :( Hope my config from the previous post is more useful. Thanks in advance, Oliver ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
