yes, I guess your prolbem is like what Christian said before. Tye using console=ttyS0,9600 to append boot options.
======= 2004-04-02 23:40:00 Origianl message======= >Am Friday 02 April 2004 20:33 schrieb Jeff Tucker: >> I've re-built U-Boot in debug mode so I can see what is going on. >> Here's what it spits out before the board locks up: >[snip] >> procfreq = 266.666 MHz >> plb_busfreq = 133.333 MHz >> pci_busfreq = 33.333 MHz >> ethaddr = 00:04:AC:E3:24:A7 >> IP addr = 192.168.0.91 >> baudrate = 9600 bps >> No initrd >> ## Transferring control to Linux (at address 00000000) ... > >If you're connected via a serial console make sure to append the >correct bootoptions to the kernel to get your output to /dev/ttySx. = = = = = = = = = = = = = = = = = = = = Best regards Jack Liu R&D Dept. USI(Shanghai) Inc. Tel: +86-21-58966996x115 Fax: +86-21-58967931 Email: Jack_liu at usish.com http://www.usi.com.tw ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
