- The stuff in arch/ppc/boot/mvme2100 can go. Figured that out today, too. It won't compile anyway. Thanks.
>- The open_pic.c change shouldn't be needed either. > > Maybe the CONFIG_EPIC_SERIAL_MODE should be set, shouldn't it? Will add it tomorrow. Should I add that cascade hookup stuff even if there is no cascaded 8259? >- Your openpic_initsenses table looks wrong, and is probably the cause > of the uart slowness you found. What you do is only list the IRQs for > which you have something, and use openpic_set_sources calls to skip > over the gaps. Look at lopec_init_IRQ and ask if you still have > problems. I hoped to have documented that one well the first time > around. :) > > There is one problem - in the LoPEC manual all interrupts are documented - even if marked unused (I refer to polarity and level/edge). In the MVME2100 information about that interrupts is N/A. So should I leave those to 0 still in the initsenses struct? Thanks for the help, Oliver Korpilla ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
