During creating jffs2 ,I modified the file /drive/mtd/maps/rpxlite.c just like the file tqm8xxl.c,I refered the manual DULG.after loading and running the kernel,display some following message:
init_rpxlite_mtd: chip probing count 0 request_module[cfi_cmdset_0002]: Root fs not mounted Support for command set 0002 not present cfi_probe: No supported Vendor Command Set found init_rpxlite_mtd: chip probing count 1 request_module[cfi_cmdset_0002]: Root fs not mounted Support for command set 0002 not present cfi_probe: No supported Vendor Command Set found init_rpxlite_mtd: chip probing count 2 request_module[cfi_cmdset_0002]: Root fs not mounted Support for command set 0002 not present cfi_probe: No supported Vendor Command Set found init_rpxlite_mtd: chip probing count 3 request_module[cfi_cmdset_0002]: Root fs not mounted Support for command set 0002 not present cfi_probe: No supported Vendor Command Set found RPXLITE: No support flash chips found! Where is wrong? and when I use the commmand xd ,show no command,why? thanks !! ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
