In message <Pine.OSF.4.21.0404211715180.5736-100000 at ws9.cdotb.ernet.in> you wrote: > > I am newbie to the Linux Porting. I am having a mpc8260 board(custom > made). I am trying to configure the cogent mpc8260 board. For a testing
If you have custom hardware, you cannot use the configuration for the Cogent board. Each board needs special adaptions and configuration. > purpose, I am running U-Boot in the SDRAM area, but not from the Why do you do this? If you have read the U-Boot mailing list archives (You DID read he archives before posting, didn't you???) you should have learned that this is not as trivial as it may seem. It's defintely not an option if you don't know EXACTLY what you are doing. > flash. I am getting the following error messages. Any help will > appreciated. ... > FLASH: *** failed *** > ### ERROR ### Please RESET the board ### Well, you ran into an error, obviously because the flash memory on your hardware is different from the configuration on the Cogent board. And bythe way: please post such questions to the U-Boot-users mailing list instead; they are off topic here. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de Don't tell me how hard you work. Tell me how much you get done. - James J. Ling ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
