Hi,
Kernel Booting hangs just after entering start_kernel function.
Even I can't see the printk fuction for printing linux banner getting
executed.
I have compiled linux-2.4.18 for MPC860.
-Anil
-----Original Message-----
From: bhupinder sahran [mailto:[EMAIL PROTECTED]
Sent: Wednesday, May 07, 2003 9:22 PM
To: Anil Giri; linuxppc-embedded at lists.linuxppc.org
Subject: Re: problem in booting kernel
Hi
>From the inuts u have given it is very tough to find
out. But let me ask u some of the questions.
1. One possiblity is that ur serial port is not
configured properly & u are not seeing any message
from the console port.
2. IF u are having the JTAG debugger find out the
value in Program conuter & see where it matches in
System.map.
So tell me the PC value then it might be possible to
catch the problem
Thanx
Bhupi
Linux+Hypertransport -->Silicon
www.gdatech.com
Good after beer ---Linux
--- Anil Giri <anil at india.tejasnetworks.com> wrote:
>
> Hi,
>
>
> I m trying to boot kernel for linux-2.4.18
> (MPC860 processor), but it
>
>
> hangs after "Now booting the kernel" message. What
> could be the reason???
>
>
> also on debugging i found negative value for
> register R3 instead of ptr to
>
>
> board info data. Other register settings were ok.
>
>
> Any imputs...
>
>
>
>
> -Anil
>
>
>
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
