In message <200312061024.EAA19753 at lists.linuxppc.org> you wrote:
>
> My reference board is Sandpoint X2.
...
> and Sandpoint X2 was booted smoothly.
> Then I modified the serial port information in
> ~~/u-boot1.0.0/include/configs/sandpoint8240.h because the serial port
You should rather create your own board config file.
> address on my board is different from that on Sandpoint X2. Below are my
> modification:
...
> After "make" and "burn u-boot.bin in flash" I reset my board
> and I saw nothing on my console:(
> Any suggestion? Thanks in advance.
Well, what do you expect? Remote debugging through a telepathy link?
Obviously your changes are wrong and/or insufficient to make U-Boot
work on your baord.
Attach your BDI2000, fire up GDB and check what's going on there.
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
Name one thing windows is better than unix in?
Making money for Microsoft?
-- Randal L. Schwartz in <8cvi5t4c3t.fsf at gadget.cscaper.com>
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
