Hi !!! First and foremost.... THANKS a MILLION for your response.
I did what you suggested and got an error while building.(error message attached below) I am not sure how I should be proceeding. Like I said before I have a S3 ViRGE/GX card. Since I did not find ViRGE/GX in the menuconfig, I enabled S3 Trio. Do you think there is any chance of this working ? I searched up the net for similar error conditions... http://lists.terrasoftsolutions.com/yellowdog-general/July01/0930.html For them the simple solution was to unselect S3 Trio in menuconfig. It cant apply in my case right. Now what do I do ??? Any leads on how to proceed are deeply appreciated. Thanks in advance. - S u d e e p V If at first you dont succeed, skydiving is not for you. -----Original Message----- From: Juergen Beisert [mailto:[EMAIL PROTECTED] Sent: Monday, December 15, 2003 9:03 PM To: Sudeep, V Cc: linuxppc-embedded at lists.linuxppc.org Subject: Re: dummy_con Hi! > THE PROBLEM: While compiling the kernel I get the following error. > arch/ppc/kernel/kernel.o: In function `ppc4xx_setup_arch': > arch/ppc/kernel/kernel.o(.text.init+0xbee): undefined reference to > `dummy_con' > arch/ppc/kernel/kernel.o(.text.init+0xbf2): undefined reference to > `dummy_con' > arch/ppc/kernel/kernel.o(.text.init+0xbf6): undefined reference to > `conswitchp' > arch/ppc/kernel/kernel.o(.text.init+0xbfa): undefined reference to > `conswitchp' > drivers/char/char.o: In function `chr_dev_init': > drivers/char/char.o(.text.init+0x248): undefined reference to `fbmem_init' > drivers/char/char.o(.text.init+0x248): relocation truncated to fit: > R_PPC_REL24 fbmem_init > make: *** [vmlinux] Error 1 Try activate the "Virtual terminal" and "Support for console on virtual terminal". JB ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
