In message <20031218180858.55548.qmail at web41902.mail.yahoo.com> you wrote: > > I am porting latest version Denx linux > linuxppc_2_4_devel kernel and U-boot 3.0 to our MPC850 > board. I also used SELF to generate the ext2 file > system. I am using the TQM850L configuration
If your board is not a TQM850L you should be extremely carefult - you will most probably need your own set of config options instead. > on my board, and configured the SCC2 as serial > console(because the hardware designed like this). And your hardware design is most probably different from that of the TQM850L< so be careful again. > I am stuck here and any response will be cordially > appreciated! I guess your serial ports are misconfigured. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de "Here's a fish hangs in the net like a poor man's right in the law. 'Twill hardly come out." - Shakespeare, Pericles, Act II, Scene 1 ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
