Hello, For my end target I have to boot across a shared memory interface by placing the executable into RAM. This is part of a multi processor system where the Linux board is a cPCI slave. The Linux board will not have a flash or a network connection. I is held in reset by the master until the s/w is loaded and then released. This is an 8275 target. The "Master" is a Solaris Workstation or a PC style Linux box or card.
Any suggestions on how to do this ? Have to fill in my own board info in a bd_t struct, pass it in R3, if I use and initrd it's start and end ptrs go into R4, R5 and the cmd line params will be hard coded and inserted into R6,R7... I will be using a RAM disk for the root file system. Instead of compressing and creating uImage for das u-boot, I create a binary(?) image and just shove it into RAM at 0? Ensure the Reset vec is set to my initialization code that will be part of the download... Any ideas would be appreciated. Thank you Kevin ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
