Dear Matthias, in message <b789c2e60601040333o42d64c52n at mail.gmail.com> you wrote: > > I have been trying to get X.org running on a board called "Embedded > Planet EP5200C" (it seems to be a "Freescale Lite5200") and a Fujitsu
Umm... no. Embedded Plaet and Freescale are two different companies, and EP5200 and Lite5200 are two different boards. > Coral-P (Rev 5.0). I am using the 2.4 kernel from denx.de and Our kernel does not include any support for the EP5200 board. > succesfully installed gentoo-ppc on nfs. The framebuffer works, I get > a login prompt on the monitor. > > Now I compiled x.org-6.8.2 (gentoo -r4) and the mb86290 driver from > denx.de. Unfortunately, it does not work and I get a segmentation > fault when trying to startx. strace produces the output attached > below. Please read the documentation that comes with the driver: ftp://ftp.denx.de/pub/fujitsu/Coral-P/README.html Note that the driver was built and tested against xfree86-4.3.0; don't expect the binary to work in a completely different X11 release. You wil have to rebuild (and eventually adapt) the driver for your environment. Feel free to contact me if you need help. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de What can it profit a man to gain the whole world and to come to his property with a gastric ulcer, a blown prostate, and bifocals? -- John Steinbeck, _Cannery Row_
