Hi, My MPC8260 customs board has LXT971 Ethernet chip on FCC1. I am able to get the linux prompt, but I am unable to initialize ethernet. I have tried different bootarg options (like setenv bootargs ip=dhcp etc) and different kernel compilation options (like from make menuconfig, Network Option->enable DHCP support etc), but none enables the ethernet interface.
Any help will be appreciated. FYI, the ethernet is working from U-Boot. Thanks, Batsayan Das Tata Consultancy Services Limited Mailto: batsayan.das at tcs.com Website: http://www.tcs.com Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you -------------- next part -------------- An HTML attachment was scrubbed... URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20060106/83e47b9d/attachment.htm
