On Sat, Jan 07, 2006 at 11:04:55AM -0500, Miguel Bello wrote: > We have a TQMxxL board with ppcboot 1.1.5, kernel 2.4.25 and a ramdisk. > I would like to setup a wireless link with WPA protocol (hostap driver > and wpa_supplicant client). We are testing 2 cards: Netgear MA401 and > Linksys WPC11 v3, both with prism chipset. > > When I execute cardmgr, I get the kernel error message attached below. > With others cards with no prism chipset, like YDI Diamond, YDI Sapphire > or Cisco Airnet 350, I have no problem, the cardmgr recognize them. > But I need to use the hostap driver with prism chipset cards > (Please take note that with kernel 2.4.4 the cardmgr recognize the > Netgear MA401, for instance) > > If anyone has a clue to what I'm doing wrong, I'd appreciate it. > > Best Regards > > Miguel Bello > > ====================================================================0 > > PPCBoot 1.1.5 (Sep 6 2004 - 13:09:55) > > CPU: PPC823EZTnnB2 at 50 MHz: 16 kB I-Cache 8 kB D-Cache > Board: ### No HW ID - assuming TQM8xxL > DRAM: 16 MB > FLASH: 8 MB > In: serial > Out: lcd > Err: lcd > Linux version 2.4.25 (root at desarrollo) (gcc version 2.95.2 19991024 > (release)) #18 Fri Jan 6 17:45:37 PET 2006 > MPC823 LCD memory at C01BE000 > On node 0 totalpages: 4096 > zone(0): 4096 pages. > zone(1): 0 pages. > zone(2): 0 pages. > Kernel command line: root=/dev/ram/ rw > ip=192.168.0.115:::255.255.255.0:::off panic=1 > Decrementer Frequency = 187500000/60 > Console: colour dummy device 80x25 > Calibrating delay loop... 49.86 BogoMIPS > Memory: 12852k available (1240k kernel code, 436k data, 76k init, 0k > highmem) > Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) > Inode cache hash table entries: 1024 (order: 1, 8192 bytes) > Mount cache hash table entries: 512 (order: 0, 4096 bytes) > Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) > Page-cache hash table entries: 4096 (order: 2, 16384 bytes) > POSIX conformance testing by UNIFIX > Linux NET4.0 for Linux 2.4 > Based upon Swansea University Computer Society NET3.039 > Initializing RT netlink socket > Starting kswapd > JFFS version 1.0, (C) 1999, 2000 Axis Communications AB > JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc. > Console: switching to colour frame buffer device 80x30 > fb0: MPC823 LCD frame buffer device > CPM UART driver version 0.04 > ttyS0 at 0x0280 is on SMC1 using BRG1 > ttyS1 at 0x0380 is on SMC2 using BRG2 > pty: 256 Unix98 ptys configured > Found 2x16bit 4MByte CFI flash device of type AMD/Fujitsu standard at > 40000000 > Registered flash device /dev/flasha (minor 0, 4 partitions) > Found 2x16bit 4MByte CFI flash device of type AMD/Fujitsu standard at > 40400000 > Registered flash device /dev/flashb (minor 8, 2 partitions) > eth0: CPM ENET Version 0.2 on SCC2, 00:d0:93:00:05:4c > RAMDISK driver initialized: 16 RAM disks of 5120K size 1024 blocksize > init_tqm_mtd: chip probing count 0 > TQM8xxL-0: Found 2 x16 devices at 0x0 in 32-bit bank > TQM8xxL-0: Found 2 x16 devices at 0x400000 in 32-bit bank > Amd/Fujitsu Extended Query Table at 0x0040 > number of CFI chips: 2 > cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. > init_tqm_mtd: bank1, name:TQM8xxL-0, size:8388608bytes > TQM flash0: Using Static image partition definition > Creating 7 MTD partitions on "TQM8xxL-0": > 0x00000000-0x00040000 : "u-boot" > 0x00040000-0x00100000 : "kernel" > 0x00100000-0x00200000 : "user" > 0x00200000-0x00400000 : "initrd" > 0x00400000-0x00600000 : "cramfs" > 0x00600000-0x00800000 : "jffs" > 0x00400000-0x00800000 : "big_fs" > Linux Kernel Card Services 3.1.22 > options: none > m8xx_pcmcia: Version 0.05, 14-Apr-2002 > m8xx_pcmcia: TQM8xxL using SLOT_B with IRQ 13. > NET4: Linux TCP/IP 1.0 for NET4.0 > IP Protocols: ICMP, UDP, TCP > IP: routing cache hash table of 512 buckets, 4Kbytes > TCP: Hash tables configured (established 1024 bind 1024) > IP-Config: Complete: > device=eth0, addr=192.168.0.115, mask=255.255.255.0, > gw=255.255.255.255, > host=192.168.0.115, domain=, nis-domain=(none), > bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. > RAMDISK: Compressed image found at block 0 > Freeing initrd memory: 1260k freed > EXT2-fs warning: checktime reached, running e2fsck is recommended > VFS: Mounted root (ext2 filesystem). > Freeing unused kernel memory: 76k init > init started: BusyBox v0.51 (2005.12.14-06:57+0000) multi-call bi > > BusyBox v0.51 (2005.12.14-06:57+0000) Built-in shell (lash) > Enter 'help' for a list of built-in commands. > > / # > / # > / # cardmgr > cardmgr[14]: watching 1 sockets > / # cardmgr[15]: starting, version is 3.2.1 > Machine check in kernel mode. > Caused by (from SRR1=9032): Transfer error ack signal > Oops: machine check, sig: 7 > NIP: C00C4840 XER: 00000000 LR: C00C481C SP: C094FB50 REGS: c094faa0 > TRAP: 0200 Not tainted > MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11 > TASK = c094e000[15] 'cardmgr' Last syscall: 54 > last math 00000000 last altivec 00000000 > GPR00: C30C1000 C094FB50 C094E000 C30C0000 C0158C30 C30C0000 FDFB3000 > 00000000 > GPR08: C30C0000 C30C0000 C0F99000 00001000 84004002 100223D8 00000000 > 00000000 > GPR16: 00000000 00000000 00000000 00000000 00009032 0094FF40 00000000 > C0004768 > GPR24: C00044C0 C094FBBA 00000002 C0FE2844 C094FBBA 00000002 C0FE2800 > 00000000 > Call backtrace: > C00C481C C00C4EF8 C00C5410 C00C51D8 C00C6B44 C00C9FF4 C0047EDC > C000451C 00000000 10001A58 100031CC 10004874 0FEA2394 00000000
Please run the oops through ksymoops to transform hex addresses into function+line. Is it DENX's v2.4.25?
