Greetings,
I've attached an updated patch (based on 2.6.16-rc1) which adds
Host mode support for the Dual-Role(DR) and Multi-Port-Host (MPH) USB
controllers found in the Freescale 8349. The update was to reconcile the
port numbering scheme such that it matches the 8349 documentation. Since
my previous patch has not yet gone upstream, the maintainer requested a
fresh patch.
Note that this patch only provides the platform-specific code that
sets up the external hardware and pin configuration. The actual DR and
MPH controller driver was posted on the linux-usb-devel mailing list.
Using a Freescale 8349CDS reference board, the DR and MPH
controllers have been successfully tested using a USB 2.0 high speed
FLASH drive, a USB 1.1 full speed 4-port hub and a Siemens SpeedStream
USB to Ethernet adapter (assuming the previous 8349 driver updates
posted to linux-usb-devel have been applied).
Randy Vinson
MontaVista Software
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: updated_8349_usb_platform.patch
Url:
http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20060123/b9183d0b/attachment.txt
