Hi everybody, (First of all, this is a repost of a mail I sent yesterday for which I haven't received a copy from the mailing list and which does not appear in the archives. If the mail hasn't been dropped, sorry for the duplicate).
I'm trying to port the Linux kernel (2.6.15.1) to the Embedded Planet 8248 board. The board has a proprietary boot loader and uses SMC1 has a serial console. After some work (2.6.15.1 has a nasty bug related to relocation which has been fixed in the git tree), I have been able to load and start the kernel image. Unfortunately, the early serial output is lost. Here is the kernel boot messages I get with 2.6.15.1 : ----------------------------------------------------------------------------- Embedded Planet EP8248 PowerPC port Built 1 zonelists Kernel command line: console=ttyCPM0,9600n8 root=/dev/ram0 rw PID hash table entries: 4096 (order: 12, 65536 bytes) Warning: real time clock seems stuck! Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 777088k available (1520k kernel code, 440k data, 96k init, 0k highmem) Mount-cache hash table entries: 512 NET: Registered protocol family 16 ----------------------------------------------------------------------------- And here is the same with the modified 2.6.10-pre3 kernel shipped with the board: ----------------------------------------------------------------------------- loaded at: 00200000 002D01E8 relocated to: 00400000 004D01E8 board data at: 004CE12C 004CE168 relocated to: 0040509C 004050D8 zimage at: 00405A31 004CD2C4 avail ram: 004D1000 01000000 Linux/PPC load: console=ttyCPM0,9600n8 root=/dev/ram0 rw Uncompressing Linux...done. Now booting the kernel Linux version 2.6.10-rc3 (laurent at pclaurent) (gcc version 3.4.1) #5 Thu Jan 19 15:25:42 CET 2006 Embedded Planet EP8248 PowerPC port Built 1 zonelists [...] ----------------------------------------------------------------------------- Early boot messages (printed with puts in ppc/boot/simple/misc-embedded.c) are lost. I compared the Embedded Planet kernel with the 2.6.10-rc3 from kernel.org, haven't seen any big change related to the SMC serial port. Embedded Planet uses BRGC7 instead of BRGC1 for SMC1, but that didn't work better for me. I of course enabled the RS232 transceivers in the board control and status registers (BCSR). Could anyone give me any pointer to where I should look at ? Thanks in advance, Laurent Pinchart
