Hi all,
I tried netconsole on a 8241 board with RealTek 8110S
Gb Ethernet.It seemed nice so far but still one step
to make it. Did I miss sth or what?
Linux version 2.6.12-rc2 (root at sam.shu.org) (gcc
version 3.2.2 20030217 (Yellow Dog Linux 3.0
3.2.2-2a_1)) #3 Mon Jul 4 12:33:23 CST 2005
......
Kernel command line:
[EMAIL PROTECTED]/eth0, at 192.168.57.200/
root=/dev/ram0 rw
ip=192.168.57.243:192.168.57.200:::TOPAZ:eth0:off
panic=1
netconsole: local port 6665
netconsole: local IP 192.168.57.243
netconsole: interface eth0
netconsole: remote port 6666
netconsole: remote IP 192.168.57.200
netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
......
RAMDISK driver initialized: 16 RAM disks of 200000K
size 1024 blocksize
eth0: RTL8169s/8110s Gigabit Ethernet driver 2.2 at
0xfe00, 00:d0:b8:00:c3:52, IRQ 0
eth0: Auto-negotiation Enabled.
eth0: 100Mbps Full-duplex operation.
netconsole: device eth0 not up yet, forcing it
netconsole: carrier detect appears untrustworthy,
waiting 4 seconds
netconsole: network logging started
Uniform Multi-Platform E-IDE driver Revision:
7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
......
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 4096 (order: 3,
32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384
bytes)
TCP: Hash tables configured (established 4096 bind
4096)
NET: Registered protocol family 1
NET: Registered protocol family 17
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.57.243,
mask=255.255.255.0, gw=255.255.255.255,
host=192, domain=, nis-domain=(none),
bootserver=192.168.57.200,
rootserver=192.168.57.200, rootpath=
RAMDISK: Compressed image found at block 0
EXT2-fs warning: mounting unchecked fs, running e2fsck
is recommended
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 120k init
OK, it just stoped before init process. Is there any
necessary to fix sth on RAMDISK like add netconsole
device node?
Thanks in advance,
Sam
___________________________________________________________
????G???????????????????
http://cn.mail.yahoo.com/?id=77071
