In message <000801c58153$54af2400$f201a8c0 at SN7606> you wrote: > > >But the kernel prints the boot parameters just fine. > > Maybe because i defined it in kernel configuration! But from u-boot i don?t > get any arguments.
Then you must be using a wrong image type. Are you sure you use "make uImage" to build your kernel image for U-Boot? > I thougt i can give the linux kernel position from u-boot where initrd is > located, but i have the same problem. You don;t. U-Boot passes this information automatically. > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > loop: loaded (max 8 devices) > VFS: Cannot open root device "<NULL>" or unknown-block(3,1) > Please append a correct "root=" boot option > Kernel panic - not syncing: VFS: Unable to mount root fs on > unknown-block(3,1) Block device 3, 1 is /dev/hda1 - is your ramdisk known to be working? Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "The majority of the stupid is invincible and guaranteed for all time. The terror of their tyranny, however, is alleviated by their lack of consistency." - Albert Einstein
