In message <42D58861.5040900 at chello.nl> you wrote: > > >>It appeard that on my mpc862 target I had also this problem. I am using > >>ELDK3.1.1 which includes a 2.4.25 kernel. > > > >No, most definitely not. > > > I don't understand this, on > /pub/Linux/distributions/eldk/3.1.1/ppc-linux-x86/distribution/common > there are the sources of a 2.4.25 kernel.
Yes, sure. But most definitely you did not have *this* problem. You have a *different* one. > >I bet that this is a FAQ. Your SDRAM initialization is broken. > > > This was one of my guesses also. Since this is beyond my knowledge, I > had the parametes initialisation parameters compared to an other > platform which did not had the problems (rtos based), the same > parameters were used. I did not investigate it any further. This *is* a FAQ. Please go and read the documentation. See http://www.denx.de/twiki/bin/view/DULG/UBootCrashAfterRelocation Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "Obviously, a major malfunction has occurred." -- Steve Nesbitt, voice of Mission Control, January 28, 1986, as the shuttle Challenger exploded within view of the grandstands.