Hello, team
I'm testing the 2.6.13-rc3 kernel on my board, all is work well
except
the FEC.
Board type: PQ3SK REVB
Kernel : 2.6.13-rc3
toolchain : ELDK 3.1.1
PHY type : Marvell 88E1111S
Compile with "make mpc8540ads_defconfig", change with nothing.
download uImage file into my board and boot with it, all is ok ! But when
I config the eth0 , it can't work , same with eth1, both of them are
Giga-eth,
but eth2 is work well, and eth2 is a 10/100-eth.
I checked the 8540ADS's hardware message , it's use 88E1011 PHY
not 88E1111 PHY . And I checked the kernel code " driver/net/gianfar_phy.c"
it takes 88E1011 and 88E1111 as same PHY , so I think this is not a hardware
problem, and my board work well with a 2.4.18 DEMO kernel.
Here is the output message of 2.6.13-rc3 kernel:
PuffLinux:root$ifconfig eth0 192.168.1.77
eth0: PHY is Generic MII (ffffffff)
If the PHY config is correct it will recognize my PHY ID, but here
is a
wrong ID number ffffffff .
Please help me solve this problem!
Thanks a lot!
KylongMu
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20050725/8dbf7fa9/attachment.htm
