In message <004101c3eb87$d2cdf090$5e1312ac at yang> you wrote: > > I encounter a problem when booting linux 2.2.4 kernel on FADS860T > board by ppcboot-2.0.
You are obviously combining several configurations that don't fit with each other. And there may be other problems or misunderstandings: > After mounting NFS filesystem on my host, the follow message was > printed in console: Not the host, but the target will mount the root file system over NFS. > eth0: CPM ENET Version 0.2 on SCC1, 44:00:00:00:00:00 > CFI: Found no TQM8xxL Bank 0 device at location zero > CFI: Found no TQM8xxL Bank 1 device at location zero > CFI: Found no TQM8xxL Bank 2 device at location zero > CFI: Found no TQM8xxL Bank 3 device at location zero > TQM8xxL: No support flash chips found! You mentioned that this was a FADS860T board - then why do you configure it for TQM8xxL flash support? Unless you know exactly what you are doing (which seems not to be the case) you should rather stick with the default configuration to get a running system. > Would you like to tell me how to make NFS filesystem on my host, > especialy how to config the init options of kenel? Thank you very > much! See http://www.denx.de/twiki/bin/view/DULG/Manual Best regards, Wolfgang Denk -- See us @ Embedded World, Nuremberg, Feb 17 - 19, Hall 12.0 Booth 440 Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de Blast medicine anyway! We've learned to tie into every organ in the human body but one. The brain! The brain is what life is all about. -- McCoy, "The Menagerie", stardate 3012.4 ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
