Hi !!! Mr Laurent , yes, I have disconnected the PCI daughter card. And yes, the kernel is compiled without the usb related drivers (like you mentioned in your first mail.)
- S u d e e p V Knowledge is the only instrument of production that is not subject to diminishing returns. -----Original Message----- From: Laurent Mohin [mailto:[EMAIL PROTECTED] Sent: Thursday, February 26, 2004 8:53 PM Subject: RE: PCI daughter card with USB on a 405GP lspci command gives you a dump of the configuration registers of your PCI devices. In your example, it detects only the IBM405GP PCI bridge The initial lines are a text traduction of what was read: 00:00.0 Host bridge: IBM 405GP PLB to PCI Bridge (rev 01) ... The last four lines are an hex dump 00: 14 10 56 01 06 00 10 22 01 00 00 06 00 07 00 00 10: 00 00 00 00 08 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 58 00 00 00 00 00 00 00 00 01 00 00 (14 10 and 56 01 are PCI vendor ID and PCI device ID for the 405GP - be careful PCI is little endian whereas 405GP is big endian) I don't see any PCI daughter card from your output. Have you disconnected it to be able to boot? If yes, try to disable the usb driver in your kernel, and see the result of the lspci command. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
