On Fri, 18 Jul 2003, Brian Padalino wrote: > I was able to create a linuxppc-2_4_devel kernel grabbed using bk > for my Ebony board. I am using > arch/ppc/boot/images/zImage.initrd.ebony to boot using the board's > bootp over ethernet, but for some reason I can't get ethernet to > configure properly on the board. .. > # CONFIG_IP_MULTICAST is not set > # CONFIG_IP_ADVANCED_ROUTER is not set > CONFIG_IP_PNP=y > CONFIG_IP_PNP_DHCP=y > # CONFIG_IP_PNP_BOOTP is not set
You don't seem to have BOOTP configured in your kernel. Is the problem on firmware or kernel level? I also strongly recommend to use u-boot as firmware instead of OpenBIOS. U-Boot has a much nicer user interface and it integrates a lot smoother with Linux. Regards, Marius -- Marius Groeger <mgroeger at sysgo.de> Software Engineering SYSGO Real-Time Solutions AG | Embedded and Real-Time Software Am Pfaffenstein 14 55270 Klein-Winternheim, Germany Voice: +49-6136-9948-0 | FAX: +49-6136-9948-10 www.sysgo.de | www.elinos.com | www.osek.de ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
