See u-boot's readme file. It describes the image format required for u-boot, basically built from vmlinux using "mkimage" tool from denx eldk.
Lokesh -----Original Message----- From: Brian Padalino [mailto:[EMAIL PROTECTED] Sent: Thursday, July 24, 2003 8:35 AM To: Linuxppc-Embedded Subject: U-Boot and 2.6.0-test1 kernel I just made and flashed U-Boot over the OpenBIOS on my Ebony board, and it appears to be working very well. I was able to do a tftp transfer and I like the interface much better than the IBM OpenBIOS -- my only problem is that when I download a binary image file made from the 2.6.0-test1 kernel, it says something about a Bad Magic number if i do "imi" for "imageinfo". Is there another utility I should be using to package this kernel up for U-Boot, or am I just not choosing the right file? Thanks, Brian ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
