Stefan Roese wrote: > Armin and David, > > >>The ethernet changes look fine. there was on other change regarding >>resetting the EMAC. The ethernet part can go in as is our we can wait >>until tomorrow when I send in that change + multi emac irq fix. >> > > I checked the EMAC/PHY patch on our board (CPCI-405 with Intel LXT971), and > the driver seems to start without problems without ethernet cable connected, > when the EMAC soft-reset command is removed from the init routine. > > With the soft-reset in init still implemented, "fec_enet_mdio_read()" > returns with timeout, waiting for transfer to complete. The next soft-reset > in open leads to the same problem (timeout in mdio_read()), but doesn't lead > to a kernel panik. > > So Armin, could you please remove the soft-reset from init (if nobody > objects, of cause). > > Best regards, > Stefan Roese > > > > >
Stefan, David & Andrew, Thanks I will remove the EMAC soft-reset. --armin ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
