Hi, Fads boards don't have any native monitor. You need to flash one on your board. If you intend to run Linux on your fads, I recommend you using ppcboot as bootloader.
You can find ppcboot at http://ppcboot.sourceforge.net Also, take a look at the "Linux for PowerPC embedded Systems Howto" at http://penguinppc.org/embedded/howto/PowerPC-Embedded-HOWTO.html. That is a very good guide. regards Evandro > -----Original Message----- > From: gao xiaoguo [mailto:gaoxg at guoguang.com.cn] > Sent: Ter?a-feira, 26 de Fevereiro de 2002 06:17 > To: linuxppc-embedded > Subject: monitor in mpc860fads > > > > hi, > > now i have a mpc860fads board, maybe there is a debug monitor > inside it. > but i dont know how to check it. i also dont know what i need > on host end to communicate with the monitor. some guide book > is appreciated. > > I am newbie in this area, hope some expertise point out a way for me. > > thanks > > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
