Thanks for the answare. I got a USB hub and now the hub and mouse are dected correctly.
K.D. >From dmesg: usb.c: registered new driver usbdevfs usb.c: registered new driver hub m8xxhci: initializing controller m8xxhci_setup() usb.c: new USB bus registered, assigned bus number 1 m8xxhci_start_controller() m8xxhci: MPC823B mask 1 m8xxhci: USING BRG4 for USB clock! cp_brgc4 0x0 before cp_brgc4 0x10000 ring sizes: rx 32, tx 40 USB microcode patch installed m8xxhci_init() enable USB controller m8xxhci_timer_start() intfreq 48, busfreq 48, count 3000 m8xxhci: USING TIMER1 FOR SOF! usb bus: idle m8xxhci: initializing done m8xxhci: control thread starting m8xxhci: device found! m8xxhci_connect_device() m8xxhci_alloc_dev(usb_dev=c01d9400) usb.c: kmalloc IF c01b94e0, numif 1 usb.c: new device strings: Mfr=0, Product=0, SerialNumber=0 hub.c: USB hub found hub.c: 4 ports detected hub.c: standalone hub hub.c: ganged power switching hub.c: global over-current protection hub.c: power on to power good time: 100ms hub.c: hub controller current requirement: 100mA hub.c: port removable status: RRRR hub.c: local power source is good hub.c: no over-current condition exists hub.c: enabling power on all ports usb.c: hub driver claimed interface c01b94e0 usb.c: registered new driver hid hub.c: port 1 connection change hub.c: port 1, portstatus 301, change 1, 1.5 Mb/s m8xxhci_alloc_dev(usb_dev=c01d9c00) hub.c: port 1, portstatus 303, change 10, 1.5 Mb/s hub.c: USB new device connect on bus1/1, assigned device number 2 usb.c: kmalloc IF c01b9820, numif 1 usb.c: skipped 1 class/vendor specific interface descriptors usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0 usb.c: USB device number 2 default language ID 0x409 Manufacturer: Microsoft Product: Microsoft IntelliMouse? Explorer complete urb c01d8d30, actual_length 0, status -1 unlink_urb(urb=c01d8d30,qtype=2) status -110 unlink_urb(urb=c01d8d30) done input0: USB HID v0.01 Mouse [Microsoft Microsoft IntelliMouse? Explorer] on usb1 :2.0 usb.c: hid driver claimed interface c01b9820 ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
