Hi, all This is a bit off-topic, but many of you have experience with BDI2000, so someone might help. I also sent an e-mail to Abatron, but time difference prevents quick reponse.
Anyway, I tried to upgrade firmware to the 1.12. Succesfully loaded it and that was the end for my BDI2000. Now it just sits there and blinks MODE LED at me. No telnet, no serial. I wanted to upload software again, but can not connect to it anymore. Tried Windows and Linux machines, different cables -- nothing works. As a last resourt, I opened BDI2000 (As per manual) and performed reset -- no luck. RED LED blinks and this is all I can get out of the thing. It is disconnected from everything, except serial port and power supply. Any ideas will be appreciated -- I miss my BDI. Thanks, /************************/ Rudolf Ladyzhenskii DSP Engineer Advanced Communication Technologies ph. +61 3 8080 8215 fax. +61 3 9672 8800 Level 9, 341 Queen Street, Melbourne, 3000 Australia /***********************/ ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
