Hello Lily, Maybe you could try to put in some printk's and see which line of code generates an exception.
JD "lily" <lichanjuan04 at st.lzu.edu.cn> Sent by: linuxppc-embedded-bounces at ozlabs.org 09/01/2005 05:55 AM To <linuxppc-embedded at ozlabs.org> cc Subject linux hangs after uncompress kernel image i work on octobusHPPC405EP board . when I try to bring up the kernel i meet the problem that linux hangs after uncompressing image: U-Boot 1.1.2 (Jun 3 2005 - 12:05:48) CPU: IBM PowerPC 405EP Rev. B at 133.333 MHz (PLB=133, OPB=66, EBC=33 MHz) IIC Boot EEPROM disabled PCI async ext clock used, internal PCI arbiter enabled 16 kB I-Cache 16 kB D-Cache OCTOBUS Board: ### No HW ID - assuming OCTOBUS HPPC405 I2C: ready DRAM: 32 MB FLASH: 4 MB =>iminfo 1000000 ## Checking Image at 01000000 ... Image Name: Linux-2.4.21-pre5 Created: 2005-08-03 17:45:20 UTC Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 548345 Bytes = 535.5 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK => bootm 1000000 ## Booting image at 01000000 ... Image Name: Linux-2.4.21-pre5 Created: 2005-08-03 17:45:20 UTC Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 548345 Bytes = 535.5 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK <hang> what's the problem?? _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded at ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded -------------- next part -------------- An HTML attachment was scrubbed... URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20050901/44066ed2/attachment.htm