Schaefer-Hutter, Peter wrote: >Hello Vitaly, > > > >>From: Vitaly Bordug [mailto:vbordug at ru.mvista.com] >> >>Mentioned support should work `out-of-the box`. >>Make sure you have console=ttyCPM0,115200 (or whatever baudrate you >>have) within bootargs in the U-Boot environment. U-Boot modification >> >> >is > > >>needed only if you wish to have both FEC MAC addresses configured via >>U-Boot env as well. Also only the related defconfig should be used. >> >> > >I have the bootargs, but still nogo - even with the mpc885ads_defconfig. > >Besides, in the mpc885ads_defconfig CONFIG_SCC3_ENET is set but in the >patch >description it reads as if only SCC1 is supported... > > Best Regards, > > Peter > > > The board does not hang - there's somithing with console since you don't see anything. Try to change BCSR_ADDR from 0xf4500000 to 0xf80...0 - the newer version of the boards may have this changed.
-- Sincerely, Vitaly -------------- next part -------------- An HTML attachment was scrubbed... URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20050803/27c1811d/attachment.htm
