Dear Alex: I had set the mhz, but of no use. I debug the kernel log found that it is halted on the mount_root() of init/do_mounts.c What is happened in my kernel ? I have initrd include it when config the kernel.
-----????----- ???: Alex Zeffertt [mailto:ajz at cambridgebroadband.com] ????: 2005?8?4? 16:32 ???: FCG WANG Baohua ??: Re: =?ISO-8859-1?B??= PPC860 board and PPCBoot "verifying Checksum... Bad Data CRC" This could be down to the clocks_in_mhz uboot environment variable. Try doing this with clocks_in_mhz=1, and again with this variable not defined. Alex On Wed, 3 Aug 2005 10:06:26 +0800 "FCG WANG Baohua" <Baohua.WANG at alcatel-sbell.com.cn> wrote: > Dear Alex : > > The kernel is halted after printing "Transferring control to Linux (at > address 00000000) ...". > I had read all the eldk FAQ and other charpter throughtly. I checked the > IMMR_ADDR in kernel > 2.4.25 and memory map.They are all right. The UART configuration is also > right. So I think the > FAQ cannot give me any help now. It is the kernel configuration that lead > the kernel halt. So I > want to ask for a right kernel configuration for 8xx ADS board. My board > type is HD860, there is > no this in kernel, I give you the patch for Montivisa, pls help me to > analyze it. I had > configure it with the patch, but there is also no use. So I think I maybe > omit a common feature > in kernel configuration. pls take a look at it. > thanks a lot! > > > -----
