Fix PowerPC NPe405H EMAC Tx channel assignments. EMAC unit in this
chip uses common for 4xx "two Tx / one Rx" configuration.
Signed-off-by: Eugene Surovegin <ebs at ebshome.net>
diff --git a/arch/ppc/platforms/4xx/ibmnp405h.c
b/arch/ppc/platforms/4xx/ibmnp405h.c
--- a/arch/ppc/platforms/4xx/ibmnp405h.c
+++ b/arch/ppc/platforms/4xx/ibmnp405h.c
@@ -34,7 +34,7 @@ static struct ocp_func_emac_data ibmnp40
.zmii_mux = 1, /* ZMII input of this EMAC */
.mal_idx = 0, /* MAL device index */
.mal_rx_chan = 1, /* MAL rx channel number */
- .mal_tx_chan = 1, /* MAL tx channel number */
+ .mal_tx_chan = 2, /* MAL tx channel number */
.wol_irq = 41, /* WOL interrupt number */
.mdio_idx = -1, /* No shared MDIO */
.tah_idx = -1, /* No TAH */
@@ -46,7 +46,7 @@ static struct ocp_func_emac_data ibmnp40
.zmii_mux = 2, /* ZMII input of this EMAC */
.mal_idx = 0, /* MAL device index */
.mal_rx_chan = 2, /* MAL rx channel number */
- .mal_tx_chan = 2, /* MAL tx channel number */
+ .mal_tx_chan = 4, /* MAL tx channel number */
.wol_irq = 41, /* WOL interrupt number */
.mdio_idx = -1, /* No shared MDIO */
.tah_idx = -1, /* No TAH */
@@ -58,7 +58,7 @@ static struct ocp_func_emac_data ibmnp40
.zmii_mux = 3, /* ZMII input of this EMAC */
.mal_idx = 0, /* MAL device index */
.mal_rx_chan = 3, /* MAL rx channel number */
- .mal_tx_chan = 3, /* MAL tx channel number */
+ .mal_tx_chan = 6, /* MAL tx channel number */
.wol_irq = 41, /* WOL interrupt number */
.mdio_idx = -1, /* No shared MDIO */
.tah_idx = -1, /* No TAH */
