Right. My USB architecture is the same as you describe. I have also support EHCI, but I disable it now. The attach files are my kernel configuration and kernel oops while plug-in USB mouse.
Thanks, Johnson Cheng -----Original Message----- From: Stefan Nickl [mailto:[EMAIL PROTECTED] Sent: Tuesday, August 23, 2005 3:48 PM To: JohnsonCheng Cc: linuxppc-embedded at ozlabs.org Subject: RE: How NEC uPD720101 USB chip work well on linux2.6.12 On Sat, 2005-07-23 at 10:37 +0800, JohnsonCheng wrote: > Correct it. > I only turn on OHCI in kernel configuration, not UHCI. I guess what you have is like this: --------- | MPC8241 | --------- | | PCI bus | -------------------------- | OHCI host controller(s?) | -------------------------- | | USB | ----------- | uPD720101 | ----------- | USB mouse So the IRQ is all up to your PCI setup and board wiring. Please send the output of ksymoops as described in linux/Documentation/oops-tracing.txt. Note that you need to run it something like this: ksymoops -v <vmlinux-of-target> -m <System.map-of-target> -t elf32-big -a ppc -K -L PS: Please check your PC's clock, your emails date back to July... -- Stefan Nickl Kontron Modular Computers -------------- next part -------------- A non-text attachment was scrubbed... Name: kernel_config Type: application/octet-stream Size: 21049 bytes Desc: not available Url : http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20050823/b402d3f7/attachment.obj -------------- next part -------------- A non-text attachment was scrubbed... Name: Kernel_Oops Type: application/octet-stream Size: 53719 bytes Desc: not available Url : http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20050823/b402d3f7/attachment-0001.obj
