Tony,
I'm going to assume that I only need the following lines:
> 0, /* EXT 3 */
> - 0, /* EXT 4 */
> - 0, /* EXT 5 */
> - 0, /* EXT 6 */
> - 0, /* EXT 7 */
> + IRQ_SENSE_LEVEL, /* EXT 4 */
> + IRQ_SENSE_LEVEL, /* EXT 5 */
> + IRQ_SENSE_LEVEL, /* EXT 6 */
> + IRQ_SENSE_LEVEL, /* EXT 7 */
Please, in the future either just create a patch an top of original
patch which shows just the new delta or start from the patch that I
sent since that is going to be my starting point. Your patch has a
lot of reformatting changes which make it extremely difficult to
review (hard to tell if the change is because of some fix or just
whitespace).
- kumar
On Aug 30, 2005, at 3:55 AM, Li Tony-r64360 wrote:
> MPC83xx cpu has two PCI buses. This patch adds support for them.
>
> After system boot. The code initializes PCI inbound/outbound
> windows, allocate and register PCI memory/io space. Be aware
> that this patch depand on the firmware.
>
> Signed-off-by: Tony Li <tony.li at freescale.com>
>
> ---
> author Tony Li <tony.li at freescale.com> Tue, 30 Aug 2005
> committer Tony Li <tony.li at freescale.com> Tue, 30 Aug 2005
>
> diff -urN -X dontdiff linux-2.6.13-rc6/arch/ppc/Kconfig
> linux-2.6.13-rc6-pci/arch/ppc/Kconfig
> --- linux-2.6.13-rc6/arch/ppc/Kconfig 2005-08-09 18:00:47.000000000
> +0800
> +++ linux-2.6.13-rc6-pci/arch/ppc/Kconfig 2005-08-19
> 18:17:27.000000000
> +0800
> @@ -712,6 +712,11 @@
> bool "Freescale MPC834x SYS"
> help
> This option enables support for the MPC 834x SYS evaluation board.
> + Be aware that PCI buses can only function when SYS board is
> plugged
> on
> + PIB (Platform IO Board) board from Freescale which provide 3 PCI
> slots.
> + Just like PC,the board level initalization is bootloader`s
> responsiblilty.
> + The PCI deponds on bootloader configurate board corretly. Refer to
> Freescale
> + to get more information about this.
>
> endchoice
>
> @@ -1191,6 +1196,10 @@
> bool
> default PCI
>
> +config MPC834x_PCI2
> + bool
> + default y if PCI && MPC834x_SYS
> +
> config PCI_QSPAN
> bool "QSpan PCI"
> depends on !4xx && !CPM2 && 8xx
> diff -urN -X dontdiff
> linux-2.6.13-rc6/arch/ppc/platforms/83xx/mpc834x_sys.c
> linux-2.6.13-rc6-pci/arch/ppc/platforms/83xx/mpc834x_sys.c
> --- linux-2.6.13-rc6/arch/ppc/platforms/83xx/mpc834x_sys.c 2005-08-09
> 18:00:47.000000000 +0800
> +++ linux-2.6.13-rc6-pci/arch/ppc/platforms/83xx/mpc834x_sys.c
> 2005-08-30 16:38:52.000000000 +0800
> @@ -62,9 +62,28 @@
> unsigned char __res[sizeof (bd_t)];
>
> #ifdef CONFIG_PCI
> -#error "PCI is not supported"
> -/* NEED mpc83xx_map_irq & mpc83xx_exclude_device
> - see platforms/85xx/mpc85xx_ads_common.c */
> +int
> +mpc83xx_ads_map_irq(struct pci_dev *dev,unsigned char idsel,unsigned
> char pin)
> +{
> + char pci_irq_table[][4]=
> + /*
> + * PCI IDSEL&INTPIN -> INTLINE
> + * INTA INTB INTC INTD
> + */
> + {
> + {PIRQA, PIRQB, PIRQC, PIRQD}, /* idsel 0x11 */
> + {PIRQC, PIRQD, PIRQA, PIRQB}, /* idsel 0x12 */
> + {PIRQD, PIRQA, PIRQB, PIRQC} /* idsel 0x13 */
> + };
> + /* MPC8349 MDS board specific */
> + const long min_idsel=0x11,max_idsel=0x13,irqs_per_slot=4;
> + return PCI_IRQ_TABLE_LOOKUP;
> +}
> +int
> +mpc83xx_ads_exclude_device(u_char bus, u_char devfn)
> +{
> + return PCIBIOS_SUCCESSFUL;
> +}
> #endif /* CONFIG_PCI */
>
> /*
> **********************************************************************
> **
> @@ -88,7 +107,7 @@
>
> #ifdef CONFIG_PCI
> /* setup PCI host bridges */
> - mpc83xx_sys_setup_hose();
> + mpc83xx_setup_hose();
> #endif
> mpc83xx_early_serial_map();
>
> @@ -175,10 +194,10 @@
> IRQ_SENSE_LEVEL, /* EXT 1 */
> IRQ_SENSE_LEVEL, /* EXT 2 */
> 0, /* EXT 3 */
> - 0, /* EXT 4 */
> - 0, /* EXT 5 */
> - 0, /* EXT 6 */
> - 0, /* EXT 7 */
> + IRQ_SENSE_LEVEL, /* EXT 4 */
> + IRQ_SENSE_LEVEL, /* EXT 5 */
> + IRQ_SENSE_LEVEL, /* EXT 6 */
> + IRQ_SENSE_LEVEL, /* EXT 7 */
> };
>
> ipic_init(binfo->bi_immr_base + 0x00700, 0, MPC83xx_IPIC_IRQ_OFFSET,
> senses, 8);
> diff -urN -X dontdiff
> linux-2.6.13-rc6/arch/ppc/platforms/83xx/mpc834x_sys.h
> linux-2.6.13-rc6-pci/arch/ppc/platforms/83xx/mpc834x_sys.h
> --- linux-2.6.13-rc6/arch/ppc/platforms/83xx/mpc834x_sys.h 2005-06-18
> 03:48:29.000000000 +0800
> +++ linux-2.6.13-rc6-pci/arch/ppc/platforms/83xx/mpc834x_sys.h
> 2005-08-23 10:00:08.000000000 +0800
> @@ -26,7 +26,7 @@
> #define VIRT_IMMRBAR ((uint)0xfe000000)
>
> #define BCSR_PHYS_ADDR ((uint)0xf8000000)
> -#define BCSR_SIZE ((uint)(32 * 1024))
> +#define BCSR_SIZE ((uint)(128 * 1024))
>
> #define BCSR_MISC_REG2_OFF 0x07
> #define BCSR_MISC_REG2_PORESET 0x01
> @@ -35,22 +35,34 @@
> #define BCSR_MISC_REG3_CNFLOCK 0x80
>
> #ifdef CONFIG_PCI
> -/* PCI interrupt controller */
> -#define PIRQA MPC83xx_IRQ_IRQ4
> -#define PIRQB MPC83xx_IRQ_IRQ5
> -#define PIRQC MPC83xx_IRQ_IRQ6
> -#define PIRQD MPC83xx_IRQ_IRQ7
> -
> -#define MPC834x_SYS_PCI1_LOWER_IO 0x00000000
> -#define MPC834x_SYS_PCI1_UPPER_IO 0x00ffffff
>
> -#define MPC834x_SYS_PCI1_LOWER_MEM 0x80000000
> -#define MPC834x_SYS_PCI1_UPPER_MEM 0x9fffffff
> +#define PCI1_CFG_ADDR_OFFSET (0x8300)
> +#define PCI1_CFG_DATA_OFFSET (0x8304)
>
> -#define MPC834x_SYS_PCI1_IO_BASE 0xe2000000
> -#define MPC834x_SYS_PCI1_MEM_OFFSET 0x00000000
> +#define PCI2_CFG_ADDR_OFFSET (0x8380)
> +#define PCI2_CFG_DATA_OFFSET (0x8384)
> +
> +#define PIRQA MPC83xx_IRQ_EXT4
> +#define PIRQB MPC83xx_IRQ_EXT5
> +#define PIRQC MPC83xx_IRQ_EXT6
> +#define PIRQD MPC83xx_IRQ_EXT7
> +
> +#define MPC83xx_PCI1_LOWER_IO 0x00000000
> +#define MPC83xx_PCI1_UPPER_IO 0x00ffffff
> +#define MPC83xx_PCI1_LOWER_MEM 0x80000000
> +#define MPC83xx_PCI1_UPPER_MEM 0x9fffffff
> +#define MPC83xx_PCI1_IO_BASE 0xe2000000
> +#define MPC83xx_PCI1_MEM_OFFSET 0x00000000
> +#define MPC83xx_PCI1_IO_SIZE 0x01000000
> +
> +#define MPC83xx_PCI2_LOWER_IO 0x00000000
> +#define MPC83xx_PCI2_UPPER_IO 0x00ffffff
> +#define MPC83xx_PCI2_LOWER_MEM 0xa0000000
> +#define MPC83xx_PCI2_UPPER_MEM 0xbfffffff
> +#define MPC83xx_PCI2_IO_BASE 0xe3000000
> +#define MPC83xx_PCI2_MEM_OFFSET 0x00000000
> +#define MPC83xx_PCI2_IO_SIZE 0x01000000
>
> -#define MPC834x_SYS_PCI1_IO_SIZE 0x01000000
> #endif /* CONFIG_PCI */
>
> #endif /* __MACH_MPC83XX_SYS_H__ */
> diff -urN -X dontdiff linux-2.6.13-rc6/arch/ppc/syslib/ppc834x_pci.h
> linux-2.6.13-rc6-pci/arch/ppc/syslib/ppc834x_pci.h
> --- linux-2.6.13-rc6/arch/ppc/syslib/ppc834x_pci.h 1970-01-01
> 08:30:00.000000000 +0830
> +++ linux-2.6.13-rc6-pci/arch/ppc/syslib/ppc834x_pci.h 2005-08-19
> 18:30:11.000000000 +0800
> @@ -0,0 +1,161 @@
> +/* Created by Tony Li <tony.li at freescale.com> 2005.6
> + * Copyright (c) 2005 freescale semiconductor
> + *
> + * This program is free software; you can redistribute it and/or
> modify it
> + * under the terms of the GNU General Public License as
> published by
> the
> + * Free Software Foundation; either version 2 of the License, or
> (at
> your
> + * option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> along
> + * with this program; if not, write to the Free Software Foundation,
> Inc.,
> + * 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#ifndef __MPC834X_PCI_H__
> +#define __MPC834X_PCI_H__
> +
> +typedef struct immr_clk {
> + u32 spmr; /* system PLL mode Register */
> + u32 occr; /* output clock control Register */
> + u32 sccr; /* system clock control Register */
> + u8 res0[0xF4];
> +} immr_clk_t;
> +
> +/*
> + * PCI Software Configuration Registers
> + */
> +typedef struct immr_pciconf {
> + u32 config_address;
> + u32 config_data;
> + u32 int_ack;
> + u8 res[116];
> +} immr_pciconf_t;
> +
> +/*
> + * Sequencer
> + */
> +typedef struct immr_ios {
> + u32 potar0;
> + u8 res0[4];
> + u32 pobar0;
> + u8 res1[4];
> + u32 pocmr0;
> + u8 res2[4];
> + u32 potar1;
> + u8 res3[4];
> + u32 pobar1;
> + u8 res4[4];
> + u32 pocmr1;
> + u8 res5[4];
> + u32 potar2;
> + u8 res6[4];
> + u32 pobar2;
> + u8 res7[4];
> + u32 pocmr2;
> + u8 res8[4];
> + u32 potar3;
> + u8 res9[4];
> + u32 pobar3;
> + u8 res10[4];
> + u32 pocmr3;
> + u8 res11[4];
> + u32 potar4;
> + u8 res12[4];
> + u32 pobar4;
> + u8 res13[4];
> + u32 pocmr4;
> + u8 res14[4];
> + u32 potar5;
> + u8 res15[4];
> + u32 pobar5;
> + u8 res16[4];
> + u32 pocmr5;
> + u8 res17[4];
> + u8 res18[0x60];
> + u32 pmcr;
> + u8 res19[4];
> + u32 dtcr;
> + u8 res20[4];
> +} immr_ios_t;
> +#define POTAR_TA_MASK 0x000fffff
> +#define POBAR_BA_MASK 0x000fffff
> +#define POCMR_EN 0x80000000
> +#define POCMR_IO 0x40000000 /* 0--memory space 1--I/O space */
> +#define POCMR_SE 0x20000000 /* streaming enable */
> +#define POCMR_DST 0x10000000 /* 0--PCI1 1--PCI2 */
> +#define POCMR_CM_MASK 0x000fffff
> +
> +/*
> + * PCI Controller Control and Status Registers
> + */
> +typedef struct immr_pcictrl {
> + u32 esr;
> + u32 ecdr;
> + u32 eer;
> + u32 eatcr;
> + u32 eacr;
> + u32 eeacr;
> + u32 edlcr;
> + u32 edhcr;
> + u32 gcr;
> + u32 ecr;
> + u32 gsr;
> + u8 res0[12];
> + u32 pitar2;
> + u8 res1[4];
> + u32 pibar2;
> + u32 piebar2;
> + u32 piwar2;
> + u8 res2[4];
> + u32 pitar1;
> + u8 res3[4];
> + u32 pibar1;
> + u32 piebar1;
> + u32 piwar1;
> + u8 res4[4];
> + u32 pitar0;
> + u8 res5[4];
> + u32 pibar0;
> + u8 res6[4];
> + u32 piwar0;
> + u8 res7[132];
> +} immr_pcictrl_t;
> +#define PITAR_TA_MASK 0x000fffff
> +#define PIBAR_MASK 0xffffffff
> +#define PIEBAR_EBA_MASK 0x000fffff
> +#define PIWAR_EN 0x80000000
> +#define PIWAR_PF 0x20000000
> +#define PIWAR_RTT_MASK 0x000f0000
> +#define PIWAR_RTT_NO_SNOOP 0x00040000
> +#define PIWAR_RTT_SNOOP 0x00050000
> +#define PIWAR_WTT_MASK 0x0000f000
> +#define PIWAR_WTT_NO_SNOOP 0x00004000
> +#define PIWAR_WTT_SNOOP 0x00005000
> +#define PIWAR_IWS_MASK 0x0000003F
> +#define PIWAR_IWS_4K 0x0000000B
> +#define PIWAR_IWS_8K 0x0000000C
> +#define PIWAR_IWS_16K 0x0000000D
> +#define PIWAR_IWS_32K 0x0000000E
> +#define PIWAR_IWS_64K 0x0000000F
> +#define PIWAR_IWS_128K 0x00000010
> +#define PIWAR_IWS_256K 0x00000011
> +#define PIWAR_IWS_512K 0x00000012
> +#define PIWAR_IWS_1M 0x00000013
> +#define PIWAR_IWS_2M 0x00000014
> +#define PIWAR_IWS_4M 0x00000015
> +#define PIWAR_IWS_8M 0x00000016
> +#define PIWAR_IWS_16M 0x00000017
> +#define PIWAR_IWS_32M 0x00000018
> +#define PIWAR_IWS_64M 0x00000019
> +#define PIWAR_IWS_128M 0x0000001A
> +#define PIWAR_IWS_256M 0x0000001B
> +#define PIWAR_IWS_512M 0x0000001C
> +#define PIWAR_IWS_1G 0x0000001D
> +#define PIWAR_IWS_2G 0x0000001E
> +
> +#endif /*__MPC834X_PCI_H__*/
> diff -urN -X dontdiff linux-2.6.13-rc6/arch/ppc/syslib/ppc83xx_setup.c
> linux-2.6.13-rc6-pci/arch/ppc/syslib/ppc83xx_setup.c
> --- linux-2.6.13-rc6/arch/ppc/syslib/ppc83xx_setup.c 2005-08-09
> 18:00:47.000000000 +0800
> +++ linux-2.6.13-rc6-pci/arch/ppc/syslib/ppc83xx_setup.c 2005-08-23
> 10:18:04.000000000 +0800
> @@ -11,6 +11,20 @@
> * under the terms of the GNU General Public License as
> published by
> the
> * Free Software Foundation; either version 2 of the License, or
> (at
> your
> * option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> along
> + * with this program; if not, write to the Free Software Foundation,
> Inc.,
> + * 675 Mass Ave, Cambridge, MA 02139, USA.
> + *
> + * July 2005, Tony Li<tony.li at freescale.com>
> + * Added PCI support
> + * PCI can be enabled only if MPC834x SYS board combined with
> PIB(Platform
> + * IO Board) board in which three physical PCI slots locate.
> */
>
> #include <linux/config.h>
> @@ -19,7 +33,7 @@
> #include <linux/init.h>
> #include <linux/pci.h>
> #include <linux/serial.h>
> -#include <linux/tty.h> /* for linux/serial_core.h */
> +#include <linux/tty.h> /* for linux/serial_core.h */
> #include <linux/serial_core.h>
> #include <linux/serial_8250.h>
>
> @@ -31,27 +45,29 @@
> #include <asm/delay.h>
>
> #include <syslib/ppc83xx_setup.h>
> +#if defined(CONFIG_PCI)
> +#include <asm/delay.h>
> +#include <syslib/ppc834x_pci.h>
> +#endif
>
> phys_addr_t immrbar;
>
> /* Return the amount of memory */
> -unsigned long __init
> -mpc83xx_find_end_of_memory(void)
> +unsigned long __init mpc83xx_find_end_of_memory(void)
> {
> - bd_t *binfo;
> + bd_t *binfo;
>
> - binfo = (bd_t *) __res;
> + binfo = (bd_t *) __res;
>
> - return binfo->bi_memsize;
> + return binfo->bi_memsize;
> }
>
> -long __init
> -mpc83xx_time_init(void)
> +long __init mpc83xx_time_init(void)
> {
> #define SPCR_OFFS 0x00000110
> #define SPCR_TBEN 0x00400000
>
> - bd_t *binfo = (bd_t *)__res;
> + bd_t *binfo = (bd_t *) __res;
> u32 *spcr = ioremap(binfo->bi_immr_base + SPCR_OFFS, 4);
>
> *spcr |= SPCR_TBEN;
> @@ -62,11 +78,10 @@
> }
>
> /* The decrementer counts at the system (internal) clock freq divided
> by 4 */
> -void __init
> -mpc83xx_calibrate_decr(void)
> +void __init mpc83xx_calibrate_decr(void)
> {
> - bd_t *binfo = (bd_t *) __res;
> - unsigned int freq, divisor;
> + bd_t *binfo = (bd_t *) __res;
> + unsigned int freq, divisor;
>
> freq = binfo->bi_busfreq;
> divisor = 4;
> @@ -75,15 +90,14 @@
> }
>
> #ifdef CONFIG_SERIAL_8250
> -void __init
> -mpc83xx_early_serial_map(void)
> +void __init mpc83xx_early_serial_map(void)
> {
> #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
> struct uart_port serial_req;
> #endif
> struct plat_serial8250_port *pdata;
> bd_t *binfo = (bd_t *) __res;
> - pdata = (struct plat_serial8250_port *)
> ppc_sys_get_pdata(MPC83xx_DUART);
> + pdata = (struct plat_serial8250_port
> *)ppc_sys_get_pdata(MPC83xx_DUART);
>
> /* Setup serial port access */
> pdata[0].uartclk = binfo->bi_busfreq;
> @@ -91,7 +105,7 @@
> pdata[0].membase = ioremap(pdata[0].mapbase, 0x100);
>
> #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
> - memset(&serial_req, 0, sizeof (serial_req));
> + memset(&serial_req, 0, sizeof(serial_req));
> serial_req.iotype = SERIAL_IO_MEM;
> serial_req.mapbase = pdata[0].mapbase;
> serial_req.membase = pdata[0].membase;
> @@ -114,8 +128,7 @@
> }
> #endif
>
> -void
> -mpc83xx_restart(char *cmd)
> +void mpc83xx_restart(char *cmd)
> {
> volatile unsigned char __iomem *reg;
> unsigned char tmp;
> @@ -129,7 +142,7 @@
> * Otherwise the reset asserts but doesn't clear.
> */
> tmp = in_8(reg + BCSR_MISC_REG3_OFF);
> - tmp |= BCSR_MISC_REG3_CNFLOCK; /* low true, high false */
> + tmp |= BCSR_MISC_REG3_CNFLOCK; /* low true, high false */
> out_8(reg + BCSR_MISC_REG3_OFF, tmp);
>
> /*
> @@ -145,21 +158,252 @@
> tmp |= BCSR_MISC_REG2_PORESET;
> out_8(reg + BCSR_MISC_REG2_OFF, tmp);
>
> - for(;;);
> + for (;;) ;
> }
>
> -void
> -mpc83xx_power_off(void)
> +void mpc83xx_power_off(void)
> {
> local_irq_disable();
> - for(;;);
> + for (;;) ;
> }
>
> -void
> -mpc83xx_halt(void)
> +void mpc83xx_halt(void)
> {
> local_irq_disable();
> - for(;;);
> + for (;;) ;
> +}
> +
> +#if defined(CONFIG_PCI)
> +void __init mpc83xx_setup_pci1(struct pci_controller *hose)
> +{
> + unsigned short reg16;
> + volatile immr_pcictrl_t *pci_ctrl;
> + volatile immr_ios_t *ios;
> + bd_t *binfo = (bd_t *) __res;
> +
> + pci_ctrl = ioremap(binfo->bi_immr_base + 0x8500,
> + sizeof(immr_pcictrl_t));
> + ios = ioremap(binfo->bi_immr_base + 0x8400, sizeof(immr_ios_t));
> +
> + /*
> + * Configure PCI Outbound Translation Windows
> + */
> + ios->potar0 = (MPC83xx_PCI1_LOWER_MEM >> 12) & POTAR_TA_MASK;
> + ios->pobar0 = (MPC83xx_PCI1_LOWER_MEM >> 12) & POBAR_BA_MASK;
> + ios->pocmr0 = POCMR_EN |
> + (((~0UL -
> + (MPC83xx_PCI1_UPPER_MEM -
> + MPC83xx_PCI1_LOWER_MEM)) >> 12) & POCMR_CM_MASK);
> +
> + /* mapped to PCI1 IO space 0x0 to local 0xe2000000 */
> + ios->potar1 = (MPC83xx_PCI1_LOWER_IO >> 12) & POTAR_TA_MASK;
> + ios->pobar1 = (MPC83xx_PCI1_IO_BASE >> 12) & POBAR_BA_MASK;
> + ios->pocmr1 = POCMR_EN | POCMR_IO |
> + (((~0UL -
> + (MPC83xx_PCI1_UPPER_IO -
> + MPC83xx_PCI1_LOWER_IO)) >> 12) & POCMR_CM_MASK);
> +
> + /*
> + * Configure PCI Inbound Translation Windows
> + */
> + pci_ctrl->pitar1 = 0x0;
> + pci_ctrl->pibar1 = 0x0;
> + pci_ctrl->piebar1 = 0x0;
> + pci_ctrl->piwar1 =
> + PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP |
> + PIWAR_IWS_2G;
> +
> + /*
> + * Release PCI RST signal
> + */
> + pci_ctrl->gcr = 0;
> + udelay(2000);
> + pci_ctrl->gcr = 1;
> + udelay(2000);
> +
> + reg16 = 0xff;
> + early_read_config_word(hose, hose->first_busno, 0, PCI_COMMAND,
> ®16);
> + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
> + early_write_config_word(hose, hose->first_busno, 0, PCI_COMMAND,
> reg16);
> +
> + /*
> + * Clear non-reserved bits in status register.
> + */
> + early_write_config_word(hose, hose->first_busno, 0, PCI_STATUS,
> 0xffff);
> + early_write_config_byte(hose, hose->first_busno, 0,
> PCI_LATENCY_TIMER,
> + 0x80);
> }
>
> -/* PCI SUPPORT DOES NOT EXIT, MODEL after ppc85xx_setup.c */
> +void __init mpc834x_ads_setup_pci2(struct pci_controller *hose)
> +{
> + unsigned short reg16;
> + volatile immr_pcictrl_t *pci_ctrl;
> + volatile immr_ios_t *ios;
> + bd_t *binfo = (bd_t *) __res;
> +
> + pci_ctrl = ioremap(binfo->bi_immr_base + 0x8600,
> + sizeof(immr_pcictrl_t));
> + ios = ioremap(binfo->bi_immr_base + 0x8400, sizeof(immr_ios_t));
> +
> + /*
> + * Configure PCI Outbound Translation Windows
> + */
> + ios->potar3 = (MPC83xx_PCI2_LOWER_MEM >> 12) & POTAR_TA_MASK;
> + ios->pobar3 = (MPC83xx_PCI2_LOWER_MEM >> 12) & POBAR_BA_MASK;
> + ios->pocmr3 = POCMR_EN | POCMR_DST |
> + (((~0UL -
> + (MPC83xx_PCI2_UPPER_MEM -
> + MPC83xx_PCI2_LOWER_MEM)) >> 12) & POCMR_CM_MASK);
> +
> + /* mapped to PCI2 IO space 0x0 to local 0xe3000000 */
> + ios->potar4 = (MPC83xx_PCI2_LOWER_IO >> 12) & POTAR_TA_MASK;
> + ios->pobar4 = (MPC83xx_PCI2_IO_BASE >> 12) & POBAR_BA_MASK;
> + ios->pocmr4 = POCMR_EN | POCMR_DST | POCMR_IO |
> + (((~0UL -
> + (MPC83xx_PCI2_UPPER_IO -
> + MPC83xx_PCI2_LOWER_IO)) >> 12) & POCMR_CM_MASK);
> +
> + /*
> + * Configure PCI Inbound Translation Windows
> + */
> + pci_ctrl->pitar1 = 0x0;
> + pci_ctrl->pibar1 = 0x0;
> + pci_ctrl->piebar1 = 0x0;
> + pci_ctrl->piwar1 =
> + PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP |
> + PIWAR_IWS_2G;
> +
> + /*
> + * Release PCI RST signal
> + */
> + pci_ctrl->gcr = 0;
> + udelay(2000);
> + pci_ctrl->gcr = 1;
> + udelay(2000);
> +
> + reg16 = 0xff;
> + early_read_config_word(hose, hose->first_busno, 0, PCI_COMMAND,
> ®16);
> + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
> + early_write_config_word(hose, hose->first_busno, 0, PCI_COMMAND,
> reg16);
> +
> + /*
> + * Clear non-reserved bits in status register.
> + */
> + early_write_config_word(hose, hose->first_busno, 0, PCI_STATUS,
> 0xffff);
> + early_write_config_byte(hose, hose->first_busno, 0,
> PCI_LATENCY_TIMER,
> + 0x80);
> +}
> +
> +extern int mpc83xx_ads_map_irq(struct pci_dev *dev, unsigned char
> idsel,
> + unsigned char pin);
> +extern int mpc83xx_ads_exclude_device(u_char bus, u_char devfn);
> +
> +/*
> + * PCI buses can be enabled only if SYS board combinates with
> PIB(Platform IO Board) board
> + * which provide 3 PCI slots. There is 2 PCI buses and 3 PCI slots,so
> people must configure
> + * the routes between them before enable PCI bus. This routes are
> under
> the control of PCA9555PW
> + * device which can be accessed via I2C bus 2 and are configured by
> firmware. Refer to Freescale to
> + * get more information about firmware configuration.
> + */
> +void __init mpc83xx_setup_hose(void)
> +{
> + unsigned long val32;
> + volatile immr_clk_t *clk;
> + volatile struct pci_controller *hose1;
> +#ifdef CONFIG_MPC834x_PCI2
> + volatile struct pci_controller *hose2;
> +#endif
> + volatile bd_t *binfo = (bd_t *) __res;
> +
> + clk = ioremap(binfo->bi_immr_base + 0xA00, sizeof(immr_clk_t));
> +
> + /*
> + * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode
> + */
> + val32 = clk->occr;
> + udelay(2000);
> + clk->occr = 0xff000000;
> + udelay(2000);
> +
> + hose1 = pcibios_alloc_controller();
> + if (!hose1)
> + return;
> +
> + ppc_md.pci_swizzle = common_swizzle;
> + ppc_md.pci_map_irq = mpc83xx_ads_map_irq;
> +
> + hose1->bus_offset = 0;
> + hose1->first_busno = 0;
> + hose1->last_busno = 0xff;
> +
> + setup_indirect_pci(hose1, binfo->bi_immr_base +
> PCI1_CFG_ADDR_OFFSET,
> + binfo->bi_immr_base + PCI1_CFG_DATA_OFFSET);
> + hose1->set_cfg_type = 1;
> +
> + mpc83xx_setup_pci1(hose1);
> +
> + hose1->pci_mem_offset = MPC83xx_PCI1_MEM_OFFSET;
> + hose1->mem_space.start = MPC83xx_PCI1_LOWER_MEM;
> + hose1->mem_space.end = MPC83xx_PCI1_UPPER_MEM;
> +
> + hose1->io_base_phys = MPC83xx_PCI1_IO_BASE;
> + hose1->io_space.start = MPC83xx_PCI1_LOWER_IO;
> + hose1->io_space.end = MPC83xx_PCI1_UPPER_IO;
> +#ifdef CONFIG_MPC834x_PCI2
> + isa_io_base = (unsigned long)ioremap(MPC83xx_PCI1_IO_BASE,
> + MPC83xx_PCI1_IO_SIZE +
> + MPC83xx_PCI2_IO_SIZE);
> +#else
> + isa_io_base = (unsigned long)ioremap(MPC83xx_PCI1_IO_BASE,
> + MPC83xx_PCI1_IO_SIZE);
> +#endif /* CONFIG_MPC834x_PCI2 */
> + hose1->io_base_virt = (void *)isa_io_base;
> + /* setup resources */
> + pci_init_resource(&hose1->io_resource,
> + MPC83xx_PCI1_LOWER_IO,
> + MPC83xx_PCI1_UPPER_IO,
> + IORESOURCE_IO, "PCI host bridge 1");
> + pci_init_resource(&hose1->mem_resources[0],
> + MPC83xx_PCI1_LOWER_MEM,
> + MPC83xx_PCI1_UPPER_MEM,
> + IORESOURCE_MEM, "PCI host bridge 1");
> +
> + ppc_md.pci_exclude_device = mpc83xx_ads_exclude_device;
> + hose1->last_busno = pciauto_bus_scan(hose1, hose1->first_busno);
> +
> +#ifdef CONFIG_MPC834x_PCI2
> + hose2 = pcibios_alloc_controller();
> + if (!hose2)
> + return;
> +
> + hose2->bus_offset = hose1->last_busno + 1;
> + hose2->first_busno = hose1->last_busno + 1;
> + hose2->last_busno = 0xff;
> + setup_indirect_pci(hose2, binfo->bi_immr_base +
> PCI2_CFG_ADDR_OFFSET,
> + binfo->bi_immr_base + PCI2_CFG_DATA_OFFSET);
> + hose2->set_cfg_type = 1;
> +
> + mpc834x_ads_setup_pci2(hose2);
> +
> + hose2->pci_mem_offset = MPC83xx_PCI2_MEM_OFFSET;
> + hose2->mem_space.start = MPC83xx_PCI2_LOWER_MEM;
> + hose2->mem_space.end = MPC83xx_PCI2_UPPER_MEM;
> +
> + hose2->io_base_phys = MPC83xx_PCI2_IO_BASE;
> + hose2->io_space.start = MPC83xx_PCI2_LOWER_IO;
> + hose2->io_space.end = MPC83xx_PCI2_UPPER_IO;
> + hose2->io_base_virt = (void *)(isa_io_base + MPC83xx_PCI1_IO_SIZE);
> + /* setup resources */
> + pci_init_resource(&hose2->io_resource,
> + MPC83xx_PCI2_LOWER_IO,
> + MPC83xx_PCI2_UPPER_IO,
> + IORESOURCE_IO, "PCI host bridge 2");
> + pci_init_resource(&hose2->mem_resources[0],
> + MPC83xx_PCI2_LOWER_MEM,
> + MPC83xx_PCI2_UPPER_MEM,
> + IORESOURCE_MEM, "PCI host bridge 2");
> +
> + hose2->last_busno = pciauto_bus_scan(hose2, hose2->first_busno);
> +#endif /* CONFIG_MPC834x_PCI2 */
> +}
> +#endif /*CONFIG_PCI */
> diff -urN -X dontdiff linux-2.6.13-rc6/arch/ppc/syslib/ppc83xx_setup.h
> linux-2.6.13-rc6-pci/arch/ppc/syslib/ppc83xx_setup.h
> --- linux-2.6.13-rc6/arch/ppc/syslib/ppc83xx_setup.h 2005-06-18
> 03:48:29.000000000 +0800
> +++ linux-2.6.13-rc6-pci/arch/ppc/syslib/ppc83xx_setup.h 2005-08-23
> 10:25:43.000000000 +0800
> @@ -12,6 +12,14 @@
> * Free Software Foundation; either version 2 of the License, or
> (at
> your
> * option) any later version.
> *
> + * This program is distributed in the hope that it will be useful,
> but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> along
> + * with this program; if not, write to the Free Software Foundation,
> Inc.,
> + * 675 Mass Ave, Cambridge, MA 02139, USA.
> */
>
> #ifndef __PPC_SYSLIB_PPC83XX_SETUP_H
> @@ -20,6 +28,7 @@
> #include <linux/config.h>
> #include <linux/init.h>
> #include <asm/ppcboot.h>
> +#include <asm/mpc83xx.h>
>
> extern unsigned long mpc83xx_find_end_of_memory(void) __init;
> extern long mpc83xx_time_init(void) __init;
> @@ -30,15 +39,6 @@
> extern void mpc83xx_halt(void);
> extern void mpc83xx_setup_hose(void) __init;
>
> -/* PCI config */
> -#if 0
> -#define PCI1_CFG_ADDR_OFFSET (FIXME)
> -#define PCI1_CFG_DATA_OFFSET (FIXME)
> -
> -#define PCI2_CFG_ADDR_OFFSET (FIXME)
> -#define PCI2_CFG_DATA_OFFSET (FIXME)
> -#endif
> -
> /* Serial Config */
> #ifdef CONFIG_SERIAL_MANY_PORTS
> #define RS_TABLE_SIZE 64
> @@ -50,4 +50,4 @@
> #define BASE_BAUD 115200
> #endif
>
> -#endif /* __PPC_SYSLIB_PPC83XX_SETUP_H */
> +#endif /* __PPC_SYSLIB_PPC83XX_SETUP_H */
>
