I got the linuxppc_2_4_devel tree at http://ppc.bkbits.net/ to boot with no problem. The compiler I used was ELDK. The config file was arch/ppc/configs/rpxcllf_defconfig.
-----Original Message----- From: Jan Dominik Baranski [mailto:[EMAIL PROTECTED] Sent: Wednesday, September 03, 2003 6:02 PM To: linuxppc-embedded at lists.linuxppc.org Subject: Kernel hangs on EP862-1.1 during boot Hello all, I'm having trouble getting a 2.4.22 kernel to boot on an Embedded Planet EP862-1.1 board (based on an MPC860). I get this: --- Loaded addresses 00400000 through 0049FFFF. >go [Go 00400000] loaded at: 00400000 004A31F4 relocated to: 00180000 002231F4 board data at: 00220128 00220144 relocated to: 001862E0 001862FC zimage at: 001868A0 0021F3EC avail ram: 00224000 01000000 Linux/PPC load: console=ttyS0,9600 Uncompressing Linux...done. Now booting the kernel <just hangs here> --- I've searched the archives, but no one seems to have this board/problem combination. I've made sure the watchdog timer is disabled and that the IMMR (0xfa200000) is set correctly. Being pretty new to this, I don't really know where else to look. Maybe something related to m8xx_board_info? The thing is, I've been able to get an old kernel (2.4.7) from Timesys that's configured for an RPX Classic board to boot correctly. I just can't figure out what they may have done that I haven't. Any suggestions?? Thanks -Jan ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/