Dear Bhavin, in message <3F5747CC.5060107 at einfochips.com> you wrote: > > Thanks a bunch for your guidance. It helped a lot. I was able to > download my Linux image to memory and in flash memory after through cp. > But in both the cases when I tried to boot my linux, the setup got > restarted after giving the message
And again this is a user error which could have been avoided had you read the documentation (like the README that comes with U-Boot). > Image Name: 2.4.5-pre1 initrd for PM826 I recommend NOT to attempt to use a 2.4.5-pre1 kernel. The PM826 board is supported by our 2.4.4 and 2.4.20 kernel trees. 2.4.5-pre1 will most likely NOT run. > Load Address: 00000000 > Entry Point: 0000000c Also, for all 2.4.x kernels the entry point address is 0x0000. > Could any one please help me what could be the possible problem as I am > totally new to this area. Or If I can get some pointer on where to look > for this trouble It would be a great help. If you are new you should probably start using tested components, like our 2.4.4 or 2.4.20 kernel trees instead of completely untested 2.4.5-pre1. See also http://www.denx.de/re/linux.html Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de "Plan to throw one away. You will anyway." - Fred Brooks, "The Mythical Man Month" ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
