Sylvain has not added bestcomm/fec to his latest tree yet: http://gitbits.246tNt.com/gitbits/linux-2.6-mpc52xx
you need to apply this patch: http://gitbits.246tNt.com/patches/bcomm-to-split.diff The patches I sent to the list are just newer bestcomm code from freescale and an fec driver that works with it. I don't make any claims about it being better just newer and different. (I haven't cleanly splitted it up yet and right now I must go, so it's probably gonna be in the git tree this week, under the 'bestcomm' head ;) On 2 Feb 2006 19:37:34 -0000, Dale Farnsworth <dale at farnsworth.org> wrote: > In article <43E24DA6.9 at freescale.com> John Rigby wrote: > > Adds fec support, requires bestcom patch. Applies to Sylvains git tree. > > Hmm, I thought that fec support was already in Sylvain's git tree. > > I'm sure Sylvain intended it to be there. > > From http://ozlabs.org/pipermail/linuxppc-embedded/2005-June/018887.html: > > Date: Sun, 19 Jun 2005 00:15:32 +0200 > > From: Sylvain Munaut <tnt at 246tNt.com> > > > > Following the obvious demand for it : > > > > rsync://gitbits.246tNt.com/gitbits/linux-2.6-mpc52xx.git > > http://gitbits.246tNt.com/gitweb.cgi?p=linux-2.6-mpc52xx.git;a=summary > > > > Hopefully the server is setup correctly ... > > It's not _heavily_ tested but it seems to works fine in the few test I > > made. > > > > What in there : > > - I2C patches that are already sent upstream but not yet in Linus tree > > - Change of the mpc52xx uart device name and device ids to a range in > > the low density serial port major. Also it's now named ttyPSC? so > > you need to update you kernel command line (else you won't see any > > console). Note that the ids and names choosed are NOT YET OFFICIAL, > > I just included it in this release because some people were seeing > > conflict with the other ids. So the name and ids may change ... > > - Some other patches that will soon be sent upstream, just waiting > > for you to test see if it has any negative impact. > > - FEC and BestComm rewrite from Dale, with some improvement. For eg, > > the FEC task now handle misaligment so the manual alignment code > > has been removed, ... > > I hope Sylvain can resurrect the 2.6 FEC code that he, I and others > worked on. > > -Dale > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded at ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded >
