Hi David,
Unfortunately I am not using u-boot. I think this is not a physical link
problem. Becouse in the bootup phase it gets the the lsp via ftp correctly. But
I thought that this errror is somehow board specific, because when I tried the
same configuration with another target board (Motorolla MVME5100) it
successfully mount to the root file system.
________________________________
Kimden: linuxppc-embedded-bounces at ozlabs.org bu ki?inin yerine: Hunter, David
G?nderilmi?: Per 09.02.2006 16:44
Kime: linuxppc-embedded at ozlabs.org
Konu: RE: powerCore 6750 nfs mount problem
Bora,
> NETDEV WATCHDOG: eth0: transmit timed out
This usually means the Ethernet driver's transmitter is stuck. Did it
initialize correctly? Did the PHY go link up?
How does network behave in your bootloader? (Hopefully you're using
U-Boot. :)
-Dave
-----Original Message-----
Date: Wed, 8 Feb 2006 11:15:41 +0200
From: "Bora KARTAL" <[EMAIL PROTECTED]>
Subject: powerCore 6750 nfs mount problem
To: <linuxppc-embedded at ozlabs.org>
Message-ID:
<C379193B17749F4BA82ABF87E7DCB6A62CF0D0 at papatyaint.aselsan.com.tr>
Content-Type: text/plain; charset="ISO-8859-9"
Hi,
I am trying to run linuxppc 2.4.20 with a nfs mounted root file system
on a Force powerCore 6750 board with the following command-line options:
CONFIG_CMDLINE="root=/dev/nfs
nfsroot=15.20.11.58:/root/Linux/MontaVista/opt/montavista/pro/devkit/ppc
/7xx/target/
ip=15.20.8.204:15.20.11.58:15.20.0.0:255.255.0.0:test1:eth0:off"
I am giving a static IP to my target board so have no need to run DHCP
client on my target board.
My problem is:
The target can not mount to my server Linux machine and gives the
following error:
Looking up port of RPC 100003/2 on 15.20.11.58
NETDEV WATCHDOG: eth0: transmit timed out
NETDEV WATCHDOG: eth0: transmit timed out
NETDEV WATCHDOG: eth0: transmit timed out
NETDEV WATCHDOG: eth0: transmit timed out
NETDEV WATCHDOG: eth0: transmit timed out
NETDEV WATCHDOG: eth0: transmit timed out
NETDEV WATCHDOG: eth0: transmit timed out
NETDEV WATCHDOG: eth0: transmit timed out
I checked the nfs server at my host Linux and it is working properly.
Anybody can help?
Thanks,
Bora
DISCLAIMER:
Important Notice *************************************************
This e-mail may contain information that is confidential, privileged or
otherwise protected from disclosure. If you are not an intended recipient of
this e-mail, do not duplicate or redistribute it by any means. Please delete it
and any attachments and notify the sender that you have received it in error.
Unintended recipients are prohibited from taking action on the basis of
information in this e-mail.E-mail messages may contain computer viruses or
other defects, may not be accurately replicated on other systems, or may be
intercepted, deleted or interfered with without the knowledge of the sender or
the intended recipient. If you are not comfortable with the risks associated
with e-mail messages, you may decide not to use e-mail to communicate with IPC.
IPC reserves the right, to the extent and under circumstances permitted by
applicable law, to retain, monitor and intercept e-mail messages to and from
its systems.
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded at ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
######################################################################
Dikkat:
Bu elektronik posta mesaji kisisel ve ozeldir. Eger size
gonderilmediyse lutfen gondericiyi bilgilendirip mesaji siliniz.
Firmamiza gelen ve giden mesajlar virus taramasindan gecirilmekte,
guvenlik nedeni ile kontrol edilerek saklanmaktadir. Mesajdaki
gorusler ve bakis acisi gondericiye ait olup Aselsan A.S. resmi
gorusu olmak zorunda degildir.
######################################################################
Attention:
This e-mail message is privileged and confidential. If you are
not the intended recipient please delete the message and notify
the sender. E-mails to and from the company are monitored for
operational reasons and in accordance with lawful business practices.
Any views or opinions presented are solely those of the author and
do not necessarily represent the views of the company.
######################################################################
