Hello all,
For my end-of-study project, I am working on an embedded system with reference
of freescale's lite5200b reference board. I was trying to boot Linux 2.6.15 on
the board (with the fec and bestcomm corrected). however the booting was stuck
at the following stage:
U-Boot 1.1.3 (Feb 6 2006 - 09:56:46)
## Booting image at 00100000 ...
Image Name: Linux-2.6.16-rc1
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 658050 Bytes = 642.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
id mach(): done
MMU:enter
MMU:hw init
MMU:mapin
MMU:setio
MMU:exit
setup_arch: enter
setup_arch: bootmem
arch: exit
I think it's probably the problem of kernel configuration prior to compilation.
Has anybody got 2.6 kernel working probably lite5200b?
THE U-BOOT ENVIRONMENT SETTINGS:
=> printenv
baudrate=115200
autoload=no
ethact=FEC ETHERNET
preboot=echo;echo Autostarting. Press any key to abort..;echo
bootdelay=5
hostname=icecube
flshroot=root=/dev/mtdblock2 rw
ethaddr=00:01:9F:00:27:2F
rootfs=root=/dev/nfs rw nfsroot=10.190.3.103:/opt/eldk/rootfs
filesize=f2
fileaddr=100000
netmask=255.255.240.0
serverip=10.190.3.103
bootcmd=tftp; bootm
bootfile=MPC5200/uImage
ipaddr=10.190.3.144
ip=ip=10.190.3.144:10.190.3.103:10.190.3.103:255.255.240.0:icecube::off
nfsroot=root=/dev/nfs rw nfsroot=10.190.3.103:/opt/eldk/rootfs
bootargs=root=/dev/nfs rw nfsroot=10.190.3.103:/opt/eldk/rootfs
ip=10.190.3.144:10.190.3.103:10.190.3.103:255.255.240.0:icecube::off
stdin=serial
stdout=serial
stderr=serial
Environment size: 704/65532 bytes
=>
THE WHLOE BOOTING MESSAGE:
U-Boot 1.1.3 (Feb 6 2006 - 09:56:46)
CPU: MPC5200 v2.2 at 462 MHz
Bus 132 MHz, IPB 132 MHz, PCI 33 MHz
Board: Freescale MPC5200 (Lite5200B)
I2C: 85 kHz, ready
DRAM: 256 MB
FLASH: 32 MB
PCI: Bus Dev VenId DevId Class Int
00 1a 1057 5809 0680 00
In: serial
Out: serial
Err: serial
Net: FEC ETHERNET
IDE: Bus 0: OK
Device 0: not available
Device 1: not available
Autostarting. Press any key to abort..
Hit any key to stop autoboot: 0
Using FEC ETHERNET device
TFTP from server 10.190.3.103; our IP address is 10.190.3.144
Filename 'MPC5200/uImage'.
Load address: 0x100000
Loading: #################################################################
################################################################
done
Bytes transferred = 658114 (a0ac2 hex)
## Booting image at 00100000 ...
Image Name: Linux-2.6.16-rc1
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 658050 Bytes = 642.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
id mach(): done
MMU:enter
MMU:hw init
MMU:mapin
MMU:setio
MMU:exit
setup_arch: enter
setup_arch: bootmem
arch: exit
Thanks.
Jianggan LI
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20060222/17def6e1/attachment.htm
