Hi Dave, I maintain the mpc860sar project - although it hasn't required much maintenance for the past year or so.
Nobody has told me about any linux-2.6 port, so it's possible you are the first to do this. If you are happy with your port I'd appreciate it if you sent me a patch which I would then consider adding to the site. FYI, I also maintain a PQII driver called mpc8260sar, and I have been sent a patch which added support for linux-2.6 without breaking linux-2.4, so I added this to the sourceforge project. If you like I'll send you the PQII linux-2.6 patch as a guide for how to do it for the original PQI driver. Alex On Fri, 24 Feb 2006 00:54:39 -0500 "Pelton, Dave" <dpelton at ciena.com> wrote: > Hello, > > I am currently working with a MPC885ADS board running a 2.6.15 > kernel build. I have been attempting to get the UTOPIA interface > working, but I have not been able to find kernel code (or patches) > to do this. > > The closest I have found so far is the MPC860/862 ATM driver on > SourceForge. Unfortunately this driver was written for the 2.4 > kernel, and does not include MPHY support for ESAR mode. I have > been able to get this code to compile and run on my kernel, and now > I am digging into the ESAR/MPHY support stuff. > > I was wondering if anyone else has already done anything along these > lines (either a ESAR/MPHY driver or MPC855 UTOPIA support on the 2.6 > kernel), as I would prefer to build on existing code rather than > gluing this stuff together myself. > > - Thanks, > David Pelton. > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded at ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded
