Hi,
I found the solution for my problem : i have to configure theSIU Interrupt
Edge/Level Register (SIEL)like that :
((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel |= 0x00020000; // for IRQ7
The SIMASK register was right.
Sophie.
> Hi all,
>
> I wrote a module driver to manage interruptions. I have an
> interruption on MPC885 IRQ7 activated by a push button that provides a
> negative pulse of 200 ns width.
> When the device is open, i call request_irq() to install the interrupt
> handler:
>
> int ret = request_irq(SIU_IRQ7, fpgadriver_irq_save_handler,
> SA_INTERRUPT, FPGA_ID, NULL);
>
> void fpgadriver_irq_save_handler(int irq, void *dev_id, struct pt_regs
> *regs)
> {
> fpga_it_source=FPGA_IRQ_SAVE;
> printk( "fpgadriver: fpgadriver_irq_save_handler for device \n");
> /* Prepare a task */
> PREPARE_TQUEUE(&fpgadriver_bh_task, fpgadriver_bh_handler, dev_id);
> /* Add a task to the immediate bottom half and mark it for schedule
> */ queue_task(&fpgadriver_bh_task, &tq_immediate);
> mark_bh(IMMEDIATE_BH);
> }
>
> my read() is like that :
>
> static ssize_t fpgadriver_read(struct file *file, char *buf, size_t
> count, loff_t *ppos)
> {
> //mise a jour de l'indicateur d'etat d'endormissement
> wakeups++;
> interruptible_sleep_on(&readq);
> buf[0]=fpga_it_source;
> printk("fpgadriver_read \n");
> return 0;
> }
>
> I have the wake_up_interruptible(&reaq) in fpgadriver_bh_handler(). My
> problem is that fpgadriver_irq_save_handler() is never called as if
> there is no interruption.
> Is there something else to modify to validate the interruption ? Is
> SIU_IRQ7 the right value for my interruption ? What have i to check ?
>
> Thanks for your reply.
>
> Sophie CARAYOL
