Hi, We had a SBS/K2 board,which had an IBM PowerPC 750 processor with cPCI interface. The old kernel on the boards worked quite well with Vxworks BSP and Linux 2.4.2 kernel. But it failed to boot with the new kernel version 2.6.8(I had tested other versions too). Here is the message I got from the HyperTerminal.
------------------------------------------------------------- Attaching to ATA disk device... done. Loading /ata0/tftpboot/zImage.elf...1425876 Starting at 0x800000... id mach(): done MMU:enter MMU:hw init hash:enter hash:find piece hash:patch hash:done MMU:mapin MMU:setio MMU:exit setup_arch: enter setup_arch: bootmem arch: exit ----------------------------------- What's the problems of these failure? Does anybody here had succeeded booting the 2.6 kernel for SBS/K2 boards? Thanks in advanced! Jianjie Ma 2005.6.27 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20050627/fffd3d2c/attachment.htm
