I'm using the MII interface on an EST SBC8260 board. I have a Canary CTX-1170 100Base-TX transceiver that connects to the MII header.
=================================== Dean Dayton - dean at aiinet.com -----Original Message----- From: Dan Malek [mailto:[EMAIL PROTECTED] Sent: Monday, June 05, 2000 4:45 PM To: Dayton, Dean Cc: 'linuxppc-embedded at lists.linuxppc.org' Subject: Re: fec on 8260 "Dayton, Dean" wrote: > I'm assuming that it wouldn't be a huge undertaking to port the 860 FEC > driver, but if someone has already done it ...;-) I'm working on the FCC driver right now. I made a huge change to the 8xx FEC driver to generically support different PHYs, so I thought I would get that one working again and then use it as a baseline for the 8260 FCC. Of course, this also means I have to make 2.4.xx work correctly on the 8xx so I can test it. I may just bail on that and get the more simple FCC driver running. What PHYs are people using? I'll post a message as soon as I get something close to working. -- Dan ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
