Yep, it has an __init for me too. Interesting. Good eyes! mike
At 04:59 PM 6/27/00, Lucinda Schafer wrote: >I noticed an __init in front of m8xx_ide_init_hwif_ports. > >According to init.h: > >/* These macros are used to mark some functions or > * initialized data (doesn't apply to uninitialized data) > * as `initialization' functions. The kernel can take this > * as hint that the function is used only during the initialization > * phase and free up used memory resources after > * > * Usage: > >If you are calling ide_register() after bootup, could this be a problem >(note: I am using 2.2.13 with no patches for the PCMCIA so this may not be >true in your case)? > >However, if your function is missing, this could be your problem. > >Maybe one of the more experienced "listees" could give a better answer. > > >Lucinda Schafer >Staff Software Engineer >Adaptive Micro-Ware, Inc. > > > >-----Original Message----- >From: Mike Coy [mailto:coym at embeddedplanet.com] >Sent: Tuesday, June 27, 2000 2:58 PM >To: Lucinda Schafer; linuxppc-embedded at lists.linuxppc.org >Subject: RE: PCMCIA ATA flash support > > > >NIP is c00def58 (m8xx_ide_init_hwif_ports) >LR is c0002da4 (inside ide_init_hwif_ports) > >I gather that LR is the place you were called from and NIP is the next >instruction, in which case both of these seem to be correct. > >mike > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
