Not a great deal of use yet till we have Ethernet support for either
TSEC or FCC, or at least till I get u-boot to boot the poxy thing when
it boots at 33MHz bus speed due to having a PCI Ethernet card present...
but here's the core cpu/board support:
diff -Nru a/arch/ppc/platforms/85xx/Kconfig b/arch/ppc/platforms/85xx/Kconfig
--- a/arch/ppc/platforms/85xx/Kconfig 2004-06-18 13:49:42 +01:00
+++ b/arch/ppc/platforms/85xx/Kconfig 2004-06-18 13:49:42 +01:00
@@ -21,6 +21,12 @@
help
This option enables support for the MPC 8540 ADS evaluation board.
+config SBC8560
+ bool "WindRiver PowerQUICC III SBC8560"
+ help
+ This option enables support for the WindRiver PowerQUICC III
+ SBC8560 board.
+
endchoice
# It's often necessary to know the specific 85xx processor type.
@@ -31,6 +37,11 @@
depends on MPC8540_ADS
default y
+config MPC8560
+ bool
+ depends on SBC8560
+ default y
+
config FSL_OCP
bool
depends on 85xx
@@ -38,7 +49,7 @@
config PPC_GEN550
bool
- depends on MPC8540
+ depends on MPC8540 || SBC8560
default y
endmenu
diff -Nru a/arch/ppc/platforms/85xx/Makefile b/arch/ppc/platforms/85xx/Makefile
--- a/arch/ppc/platforms/85xx/Makefile 2004-06-18 13:49:42 +01:00
+++ b/arch/ppc/platforms/85xx/Makefile 2004-06-18 13:49:42 +01:00
@@ -3,5 +3,7 @@
#
obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads_common.o mpc8540_ads.o
+obj-$(CONFIG_SBC8560) += sbc85xx.o sbc8560.o
obj-$(CONFIG_MPC8540) += mpc8540.o
+obj-$(CONFIG_MPC8560) += mpc8560.o
diff -Nru a/arch/ppc/platforms/85xx/mpc8560.c
b/arch/ppc/platforms/85xx/mpc8560.c
--- /dev/null Wed Dec 31 16:00:00 196900
+++ b/arch/ppc/platforms/85xx/mpc8560.c 2004-06-18 13:49:42 +01:00
@@ -0,0 +1,83 @@
+/*
+ * arch/ppc/platforms/85xx/mpc8560.c
+ *
+ * MPC8560 I/O descriptions
+ *
+ * Maintainer: Kumar Gala <kumar.gala at freescale.com>
+ *
+ * Copyright 2004 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <asm/mpc85xx.h>
+#include <asm/ocp.h>
+
+/* These should be defined in platform code */
+extern struct ocp_gfar_data mpc85xx_tsec1_def;
+extern struct ocp_gfar_data mpc85xx_tsec2_def;
+extern struct ocp_gfar_data mpc85xx_fec_def;
+extern struct ocp_mpc_i2c_data mpc85xx_i2c1_def;
+
+/* We use offsets for paddr since we do not know at compile time
+ * what CCSRBAR is, platform code should fix this up in
+ * setup_arch
+ *
+ * Only the first IRQ is given even if a device has
+ * multiple lines associated with ita
+ */
+struct ocp_def core_ocp[] = {
+ { .vendor = OCP_VENDOR_FREESCALE,
+ .function = OCP_FUNC_IIC,
+ .index = 0,
+ .paddr = MPC85xx_IIC0_OFFSET,
+ .irq = MPC85xx_IRQ_IIC1,
+ .pm = OCP_CPM_NA,
+ .additions = &mpc85xx_i2c1_def,
+ },
+ { .vendor = OCP_VENDOR_FREESCALE,
+ .function = OCP_FUNC_GFAR,
+ .index = 0,
+ .paddr = MPC85xx_ENET1_OFFSET,
+ .irq = MPC85xx_IRQ_TSEC1_TX,
+ .pm = OCP_CPM_NA,
+ .additions = &mpc85xx_tsec1_def,
+ },
+ { .vendor = OCP_VENDOR_FREESCALE,
+ .function = OCP_FUNC_GFAR,
+ .index = 1,
+ .paddr = MPC85xx_ENET2_OFFSET,
+ .irq = MPC85xx_IRQ_TSEC2_TX,
+ .pm = OCP_CPM_NA,
+ .additions = &mpc85xx_tsec2_def,
+ },
+ { .vendor = OCP_VENDOR_FREESCALE,
+ .function = OCP_FUNC_GFAR,
+ .index = 2,
+ .paddr = MPC85xx_ENET3_OFFSET,
+ .irq = MPC85xx_IRQ_FEC,
+ .pm = OCP_CPM_NA,
+ .additions = &mpc85xx_fec_def,
+ },
+ { .vendor = OCP_VENDOR_FREESCALE,
+ .function = OCP_FUNC_DMA,
+ .index = 0,
+ .paddr = MPC85xx_DMA_OFFSET,
+ .irq = MPC85xx_IRQ_DMA0,
+ .pm = OCP_CPM_NA,
+ },
+ { .vendor = OCP_VENDOR_FREESCALE,
+ .function = OCP_FUNC_PERFMON,
+ .index = 0,
+ .paddr = MPC85xx_PERFMON_OFFSET,
+ .irq = MPC85xx_IRQ_PERFMON,
+ .pm = OCP_CPM_NA,
+ },
+ { .vendor = OCP_VENDOR_INVALID
+ }
+};
diff -Nru a/arch/ppc/platforms/85xx/sbc8560.c
b/arch/ppc/platforms/85xx/sbc8560.c
--- /dev/null Wed Dec 31 16:00:00 196900
+++ b/arch/ppc/platforms/85xx/sbc8560.c 2004-06-18 13:49:42 +01:00
@@ -0,0 +1,269 @@
+/*
+ * arch/ppc/platforms/85xx/sbc8560.c
+ *
+ * Wind River SBC8560 board specific routines
+ *
+ * Maintainer: Kumar Gala <kumar.gala at freescale.com>
+ *
+ * Copyright 2004 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/serial.h>
+#include <linux/tty.h> /* for linux/serial_core.h */
+#include <linux/serial_core.h>
+#include <linux/module.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/open_pic.h>
+#include <asm/bootinfo.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc85xx.h>
+#include <asm/irq.h>
+#include <asm/immap_85xx.h>
+#include <asm/kgdb.h>
+#include <asm/ocp.h>
+#include <mm/mmu_decl.h>
+
+#include <syslib/ppc85xx_common.h>
+#include <syslib/ppc85xx_setup.h>
+
+struct ocp_gfar_data mpc85xx_tsec1_def = {
+ .interruptTransmit = MPC85xx_IRQ_TSEC1_TX,
+ .interruptError = MPC85xx_IRQ_TSEC1_ERROR,
+ .interruptReceive = MPC85xx_IRQ_TSEC1_RX,
+ .interruptPHY = MPC85xx_IRQ_EXT6,
+ .flags = (GFAR_HAS_GIGABIT | GFAR_HAS_MULTI_INTR | GFAR_HAS_PHY_INTR),
+ .phyid = 25,
+ .phyregidx = 0,
+};
+
+struct ocp_gfar_data mpc85xx_tsec2_def = {
+ .interruptTransmit = MPC85xx_IRQ_TSEC2_TX,
+ .interruptError = MPC85xx_IRQ_TSEC2_ERROR,
+ .interruptReceive = MPC85xx_IRQ_TSEC2_RX,
+ .interruptPHY = MPC85xx_IRQ_EXT7,
+ .flags = (GFAR_HAS_GIGABIT | GFAR_HAS_MULTI_INTR | GFAR_HAS_PHY_INTR),
+ .phyid = 26,
+ .phyregidx = 0,
+};
+
+struct ocp_gfar_data mpc85xx_fec_def = {
+ .interruptTransmit = MPC85xx_IRQ_FEC,
+ .interruptError = MPC85xx_IRQ_FEC,
+ .interruptReceive = MPC85xx_IRQ_FEC,
+ .interruptPHY = MPC85xx_IRQ_EXT5,
+ .flags = 0,
+ .phyid = 1,
+ .phyregidx = 0,
+};
+
+struct ocp_fs_i2c_data mpc85xx_i2c1_def = {
+ .flags = FS_I2C_SEPARATE_DFSRR,
+};
+
+
+#ifdef CONFIG_SERIAL_8250
+static void __init
+sbc8560_early_serial_map(void)
+{
+ struct uart_port uart_req;
+
+ /* Setup serial port access */
+ memset(&uart_req, 0, sizeof (uart_req));
+ uart_req.irq = MPC85xx_IRQ_EXT9;
+ uart_req.flags = STD_COM_FLAGS;
+ uart_req.uartclk = BASE_BAUD * 16;
+ uart_req.iotype = SERIAL_IO_MEM;
+ uart_req.mapbase = UARTA_ADDR;
+ uart_req.membase = ioremap(uart_req.mapbase, MPC85xx_UART0_SIZE);
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+ gen550_init(0, &uart_req);
+#endif
+
+ if (early_serial_setup(&uart_req) != 0)
+ printk("Early serial init of port 0 failed\n");
+
+ /* Assume early_serial_setup() doesn't modify uart_req */
+ uart_req.line = 1;
+ uart_req.mapbase = UARTB_ADDR;
+ uart_req.membase = ioremap(uart_req.mapbase, MPC85xx_UART1_SIZE);
+ uart_req.irq = MPC85xx_IRQ_EXT10;
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+ gen550_init(1, &uart_req);
+#endif
+
+ if (early_serial_setup(&uart_req) != 0)
+ printk("Early serial init of port 1 failed\n");
+}
+#endif
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init
+sbc8560_setup_arch(void)
+{
+ struct ocp_def *def;
+ struct ocp_gfar_data *einfo;
+ bd_t *binfo = (bd_t *) __res;
+ unsigned int freq;
+
+ /* get the core frequency */
+ freq = binfo->bi_intfreq;
+
+ if (ppc_md.progress)
+ ppc_md.progress("sbc8560_setup_arch()", 0);
+
+ /* Set loops_per_jiffy to a half-way reasonable value,
+ for use until calibrate_delay gets called. */
+ loops_per_jiffy = freq / HZ;
+
+#ifdef CONFIG_PCI
+ /* setup PCI host bridges */
+ mpc85xx_setup_hose();
+#endif
+
+#ifdef CONFIG_DUMMY_CONSOLE
+ conswitchp = &dummy_con;
+#endif
+
+#ifdef CONFIG_SERIAL_8250
+ sbc8560_early_serial_map();
+#endif
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+ /* Invalidate the entry we stole earlier the serial ports
+ * should be properly mapped */
+ invalidate_tlbcam_entry(NUM_TLBCAMS - 1);
+#endif
+
+ /* Set up MAC addresses for the Ethernet devices */
+ def = ocp_get_one_device(OCP_VENDOR_FREESCALE, OCP_FUNC_GFAR, 0);
+ if (def) {
+ einfo = (struct ocp_gfar_data *) def->additions;
+ memcpy(einfo->mac_addr, binfo->bi_enetaddr, 6);
+ }
+
+ def = ocp_get_one_device(OCP_VENDOR_FREESCALE, OCP_FUNC_GFAR, 1);
+ if (def) {
+ einfo = (struct ocp_gfar_data *) def->additions;
+ memcpy(einfo->mac_addr, binfo->bi_enet1addr, 6);
+ }
+
+ def = ocp_get_one_device(OCP_VENDOR_FREESCALE, OCP_FUNC_GFAR, 2);
+ if (def) {
+ einfo = (struct ocp_gfar_data *) def->additions;
+ memcpy(einfo->mac_addr, binfo->bi_enet2addr, 6);
+ }
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
+#endif
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+
+ ocp_for_each_device(mpc85xx_update_paddr_ocp, &(binfo->bi_immr_base));
+}
+
+/* ************************************************************************ */
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ /* parse_bootinfo must always be called first */
+ parse_bootinfo(find_bootinfo());
+
+ /*
+ * If we were passed in a board information, copy it into the
+ * residual data area.
+ */
+ if (r3) {
+ memcpy((void *) __res, (void *) (r3 + KERNELBASE),
+ sizeof (bd_t));
+ }
+
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+ /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs
*/
+ settlbcam(NUM_TLBCAMS - 1, UARTA_ADDR,
+ UARTA_ADDR, 0x1000, _PAGE_IO, 0);
+#endif
+
+#if defined(CONFIG_BLK_DEV_INITRD)
+ /*
+ * If the init RAM disk has been configured in, and there's a valid
+ * starting address for it, set it up.
+ */
+ if (r4) {
+ initrd_start = r4 + KERNELBASE;
+ initrd_end = r5 + KERNELBASE;
+ }
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+ /* Copy the kernel command line arguments to a safe place. */
+
+ if (r6) {
+ *(char *) (r7 + KERNELBASE) = 0;
+ strcpy(cmd_line, (char *) (r6 + KERNELBASE));
+ }
+
+ /* setup the PowerPC module struct */
+ ppc_md.setup_arch = sbc8560_setup_arch;
+ ppc_md.show_cpuinfo = sbc8560_show_cpuinfo;
+
+ ppc_md.init_IRQ = sbc8560_init_IRQ;
+ ppc_md.get_irq = openpic_get_irq;
+
+ ppc_md.restart = sbc8560_restart;
+ ppc_md.power_off = sbc8560_power_off;
+ ppc_md.halt = sbc8560_halt;
+
+ ppc_md.find_end_of_memory = sbc8560_find_end_of_memory;
+
+ ppc_md.time_init = NULL;
+ ppc_md.set_rtc_time = NULL;
+ ppc_md.get_rtc_time = NULL;
+ ppc_md.calibrate_decr = mpc85xx_calibrate_decr;
+
+#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
+ ppc_md.progress = gen550_progress;
+#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
+
+ if (ppc_md.progress)
+ ppc_md.progress("sbc8560_init(): exit", 0);
+
+ return;
+}
diff -Nru a/arch/ppc/platforms/85xx/sbc8560.h
b/arch/ppc/platforms/85xx/sbc8560.h
--- /dev/null Wed Dec 31 16:00:00 196900
+++ b/arch/ppc/platforms/85xx/sbc8560.h 2004-06-18 13:49:42 +01:00
@@ -0,0 +1,48 @@
+/*
+ * arch/ppc/platforms/85xx/sbc8560.h
+ *
+ * Wind River SBC8560 board definitions
+ *
+ * Copyright 2003 Motorola Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MACH_SBC8560_H__
+#define __MACH_SBC8560_H__
+
+#include <linux/config.h>
+#include <linux/serial.h>
+#include <platforms/85xx/sbc85xx.h>
+
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define RS_TABLE_SIZE 64
+#else
+#define RS_TABLE_SIZE 2
+#endif
+
+/* Rate for the 1.8432 Mhz clock for the onboard serial chip */
+#define BASE_BAUD ( 1843200 / 16 )
+
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ)
+#else
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
+#endif
+
+#define STD_SERIAL_PORT_DFNS \
+ { 0, BASE_BAUD, UARTA_ADDR, MPC85xx_IRQ_EXT9, STD_COM_FLAGS, /* ttyS0
*/ \
+ iomem_base: (u8 *)UARTA_ADDR, \
+ io_type: SERIAL_IO_MEM }, \
+ { 0, BASE_BAUD, UARTB_ADDR, MPC85xx_IRQ_EXT10, STD_COM_FLAGS, /* ttyS1
*/ \
+ iomem_base: (u8 *)UARTB_ADDR, \
+ io_type: SERIAL_IO_MEM },
+
+#define SERIAL_PORT_DFNS \
+ STD_SERIAL_PORT_DFNS
+
+#endif /* __MACH_SBC8560_H__ */
diff -Nru a/arch/ppc/platforms/85xx/sbc85xx.c
b/arch/ppc/platforms/85xx/sbc85xx.c
--- /dev/null Wed Dec 31 16:00:00 196900
+++ b/arch/ppc/platforms/85xx/sbc85xx.c 2004-06-18 13:49:42 +01:00
@@ -0,0 +1,337 @@
+/*
+ * arch/ppc/platform/mpc85xx_common_ads.c
+ *
+ * MPC85XXADS board common routines
+ *
+ * Copyright 2002, 2003 Motorola Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/serial.h>
+#include <linux/module.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/open_pic.h>
+#include <asm/bootinfo.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc85xx.h>
+#include <asm/irq.h>
+#include <asm/immap_85xx.h>
+#include <asm/ocp.h>
+
+#include <mm/mmu_decl.h>
+
+#include <platforms/85xx/sbc85xx.h>
+
+unsigned char __res[sizeof (bd_t)];
+
+#ifdef CONFIG_PCI
+void sbc8560_setup_hose(void);
+#else
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+unsigned long pci_dram_offset = 0;
+#endif
+
+#define pci_config_addr(bus,dev,offset) \
+ (0x80000000 | (bus<<16) | (dev<<8) | (offset & 0xFC))
+
+extern unsigned long total_memory; /* in mm/init */
+
+/* Internal interrupts are all Level Sensitive, and Positive Polarity */
+
+static u_char sbc8560_openpic_initsenses[] __initdata = {
+ (IRQ_POLARITY_POSITIVE), /* Internal 0: L2 Cache */
+ (IRQ_POLARITY_POSITIVE), /* Internal 1: ECM */
+ (IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */
+ (IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */
+ (IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */
+ (IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */
+ (IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */
+ (IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */
+ (IRQ_POLARITY_POSITIVE), /* Internal 8: PCI/PCI-X */
+ (IRQ_POLARITY_POSITIVE), /* Internal 9: RIO Inbound Port Write
Error */
+ (IRQ_POLARITY_POSITIVE), /* Internal 10: RIO Doorbell Inbound */
+ (IRQ_POLARITY_POSITIVE), /* Internal 11: RIO Outbound Message */
+ (IRQ_POLARITY_POSITIVE), /* Internal 12: RIO Inbound Message */
+ (IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 0 Transmit */
+ (IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 0 Receive */
+ (IRQ_POLARITY_POSITIVE), /* Internal 15: Unused */
+ (IRQ_POLARITY_POSITIVE), /* Internal 16: Unused */
+ (IRQ_POLARITY_POSITIVE), /* Internal 17: Unused */
+ (IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 0 Receive/Transmit
Error */
+ (IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 1 Transmit */
+ (IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 1 Receive */
+ (IRQ_POLARITY_POSITIVE), /* Internal 21: Unused */
+ (IRQ_POLARITY_POSITIVE), /* Internal 22: Unused */
+ (IRQ_POLARITY_POSITIVE), /* Internal 23: Unused */
+ (IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 1 Receive/Transmit
Error */
+ (IRQ_POLARITY_POSITIVE), /* Internal 25: Fast Ethernet */
+ (IRQ_POLARITY_POSITIVE), /* Internal 26: DUART */
+ (IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */
+ (IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */
+ (IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */
+ (IRQ_POLARITY_POSITIVE), /* Internal 30: CPM */
+ (IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */
+ 0x0, /* External 0: */
+ 0x0, /* External 1: */
+#if defined(CONFIG_PCI)
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI slot
0 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI slot
1 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 4: PCI slot
2 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PCI slot
3 */
+#else
+ 0x0, /* External 2: */
+ 0x0, /* External 3: */
+ 0x0, /* External 4: */
+ 0x0, /* External 5: */
+#endif
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 6: PHY */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 7: PHY */
+ 0x0, /* External 8: */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* External 9: PHY */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* External 10: PHY */
+ 0x0, /* External 11: */
+};
+
+/* ***********************************************************************
+ * The decrementer counts at the system (internal) clock frequency divided by
8
+ */
+void __init
+sbc8560_calibrate_decr(void)
+{
+ bd_t *binfo = (bd_t *) __res;
+ unsigned int freq, divisor;
+
+ /* get the core frequency */
+ freq = binfo->bi_busfreq;
+ /* The timebase is updated every 8 bus clocks, HID0[SEL_TBCLK] = 0 */
+ divisor = 8;
+ printk("time_init: decrementer frequency = %u.%.6u MHz\n",
+ freq / divisor / 1000000, (freq / divisor) % 1000000);
+ tb_ticks_per_jiffy = freq / divisor / HZ;
+ tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000);
+}
+
+/* *********************************************************************** */
+unsigned long __init
+sbc8560_find_end_of_memory(void)
+{
+ bd_t *binfo;
+
+ binfo = (bd_t *) __res;
+
+ return binfo->bi_memsize;
+}
+
+/* ************************************************************************ */
+/* f400_0000-f7ff_ffff: RIO
+ * f800_0000-fbff_ffff: Localbus SDRAM
+ * fc00_0000-ffff_ffff: BCSR,RTC,CCSR,32M Flash,etc
+ */
+void __init
+sbc8560_map_io(void)
+{
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+ /* Invalidate the entry we stole earlier and then use a proper
+ * mechanism to map things */
+ invalidate_tlbcam_entry(NUM_TLBCAMS - 1);
+#endif
+ io_block_mapping(0xfc000000, 0xfc000000, 0x04000000, _PAGE_IO);
+}
+
+/* ************************************************************************
+ * mpc85xx_ads doesn't have a mechanism to restart the system, It can
+ * however reset itself
+ */
+void
+sbc8560_restart(char *cmd)
+{
+ local_irq_disable();
+ abort();
+}
+
+/* ************************************************************************
+ * mpc85xx_ads has no support for this feature
+ */
+void
+sbc8560_power_off(void)
+{
+ local_irq_disable();
+ for (;;) ;
+}
+
+/* ************************************************************************
+ * mpc85xx_ads has support for this feature, but it hasn't been implemented
+ */
+void
+sbc8560_halt(void)
+{
+ local_irq_disable();
+ for (;;) ;
+}
+
+/* ************************************************************************ */
+int
+sbc8560_show_cpuinfo(struct seq_file *m)
+{
+ uint pvid, svid, phid1;
+ uint memsize = total_memory;
+ bd_t *binfo = (bd_t *) __res;
+ unsigned int freq;
+
+ /* get the core frequency */
+ freq = binfo->bi_intfreq;
+
+ pvid = mfspr(PVR);
+ svid = mfspr(SVR);
+
+ seq_printf(m, "Vendor\t\t: Wind River\n");
+
+ switch (svid & 0xffff0000) {
+ case SVR_8540:
+ seq_printf(m, "Machine\t\t: hhmmm, this board isn't made
yet!\n");
+ break;
+ case SVR_8560:
+ seq_printf(m, "Machine\t\t: SBC8560\n");
+ break;
+ default:
+ seq_printf(m, "Machine\t\t: unknown\n");
+ break;
+ }
+ seq_printf(m, "bus freq\t: %u.%.6u MHz\n", freq / 1000000,
+ freq % 1000000);
+ seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
+ seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+ /* Display cpu Pll setting */
+ phid1 = mfspr(HID1);
+ seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
+
+ /* Display the amount of memory */
+ seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+
+ return 0;
+}
+
+void __init
+sbc8560_init_IRQ(void)
+{
+ bd_t *binfo = (bd_t *) __res;
+ /* Determine the Physical Address of the OpenPIC regs */
+ phys_addr_t OpenPIC_PAddr =
+ binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
+ OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE);
+ OpenPIC_InitSenses = sbc8560_openpic_initsenses;
+ OpenPIC_NumInitSenses = sizeof (sbc8560_openpic_initsenses);
+
+ /* Skip reserved space and internal sources */
+ openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
+ /* Map PIC IRQs 0-11 */
+ openpic_set_sources(32, 12, OpenPIC_Addr + 0x10000);
+
+ /* we let openpic interrupts starting from an offset, to
+ * leave space for cascading interrupts underneath.
+ */
+ openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET);
+
+ return;
+}
+
+/*
+ * interrupt routing
+ */
+
+static inline int
+sbc8560_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ {PIRQA, PIRQB, PIRQC, PIRQD},
+ {PIRQD, PIRQA, PIRQB, PIRQC},
+ {PIRQC, PIRQD, PIRQA, PIRQB},
+ {PIRQB, PIRQC, PIRQD, PIRQA},
+ };
+
+ const long min_idsel = 12, max_idsel = 15, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+}
+
+#ifdef CONFIG_PCI
+int
+mpc85xx_exclude_device(u_char bus, u_char devfn)
+{
+ if (bus == 0 && PCI_SLOT(devfn) == 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ else
+ return PCIBIOS_SUCCESSFUL;
+}
+
+int
+mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * This is little evil, but works around the fact
+ * that revA boards have IDSEL starting at 18
+ * and others boards (older) start at 12
+ *
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 2 */
+ {PIRQD, PIRQA, PIRQB, PIRQC},
+ {PIRQC, PIRQD, PIRQA, PIRQB},
+ {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 5 */
+ {0, 0, 0, 0}, /* -- */
+ {0, 0, 0, 0}, /* -- */
+ {0, 0, 0, 0}, /* -- */
+ {0, 0, 0, 0}, /* -- */
+ {0, 0, 0, 0}, /* -- */
+ {0, 0, 0, 0}, /* -- */
+ {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 12 */
+ {PIRQD, PIRQA, PIRQB, PIRQC},
+ {PIRQC, PIRQD, PIRQA, PIRQB},
+ {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 15 */
+ {0, 0, 0, 0}, /* -- */
+ {0, 0, 0, 0}, /* -- */
+ {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 18 */
+ {PIRQD, PIRQA, PIRQB, PIRQC},
+ {PIRQC, PIRQD, PIRQA, PIRQB},
+ {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 21 */
+ };
+
+ const long min_idsel = 2, max_idsel = 21, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+}
+
+#endif
diff -Nru a/arch/ppc/platforms/85xx/sbc85xx.h
b/arch/ppc/platforms/85xx/sbc85xx.h
--- /dev/null Wed Dec 31 16:00:00 196900
+++ b/arch/ppc/platforms/85xx/sbc85xx.h 2004-06-18 13:49:42 +01:00
@@ -0,0 +1,69 @@
+/*
+ * arch/ppc/platforms/mpc85xx_ads_common.h
+ *
+ * MPC85XX ADS common board definitions
+ *
+ *
+ * Copyright 2003 Motorola Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MACH_SBC85XX_H__
+#define __MACH_SBC85XX_H__
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/seq_file.h>
+#include <asm/ppcboot.h>
+
+
+
+#define BOARD_CCSRBAR ((uint)0xff700000)
+#define CCSRBAR_SIZE ((uint)1024*1024)
+#define IMAP_ADDR 0xff700000
+#define BCSR_ADDR ((uint)0xfc000000)
+#define BCSR_SIZE ((uint)(16 * 1024 * 1024))
+
+#define UARTA_ADDR (BCSR_ADDR + 0x00700000)
+#define UARTB_ADDR (BCSR_ADDR + 0x00800000)
+#define RTC_DEVICE_ADDR (BCSR_ADDR + 0x00900000)
+#define EEPROM_ADDR (BCSR_ADDR + 0x00b00000)
+
+extern void sbc8560_setup_hose(void) __init;
+extern void sbc8560_restart(char *cmd);
+extern void sbc8560_power_off(void);
+extern void sbc8560_halt(void);
+extern int sbc8560_show_cpuinfo(struct seq_file *m);
+extern void sbc8560_init_IRQ(void) __init;
+extern unsigned long sbc8560_find_end_of_memory(void) __init;
+extern void sbc8560_map_io(void) __init;
+extern void sbc8560_calibrate_decr(void) __init;
+
+#define PCI1_CFG_ADDR_OFFSET (0x8000)
+#define PCI1_CFG_DATA_OFFSET (0x8004)
+#define PCI1_CFG_ADDR (CCSRBAR+0x8000)
+#define PCI1_CFG_DATA (CCSRBAR+0x8004)
+
+/* PCI interrupt controller */
+#define PIRQA MPC85xx_IRQ_EXT1
+#define PIRQB MPC85xx_IRQ_EXT2
+#define PIRQC MPC85xx_IRQ_EXT3
+#define PIRQD MPC85xx_IRQ_EXT4
+
+#define MPC85XX_PCI1_LOWER_IO 0x00000000
+#define MPC85XX_PCI1_UPPER_IO 0x00ffffff
+
+#define MPC85XX_PCI1_LOWER_MEM 0x80000000
+#define MPC85XX_PCI1_UPPER_MEM 0x9fffffff
+
+#define MPC85XX_PCI1_IO_BASE 0xe2000000
+#define MPC85XX_PCI1_MEM_OFFSET 0x00000000
+
+#define MPC85XX_PCI1_IO_SIZE 0x01000000
+
+#endif /* __MACH_SBC85XX_H__ */
diff -Nru a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c
--- a/arch/ppc/syslib/ppc85xx_setup.c 2004-06-18 13:49:42 +01:00
+++ b/arch/ppc/syslib/ppc85xx_setup.c 2004-06-18 13:49:42 +01:00
@@ -30,6 +30,8 @@
#include <asm/ocp.h>
#include <asm/kgdb.h>
+#include <syslib/ppc85xx_setup.h>
+
/* Return the amount of memory */
unsigned long __init
mpc85xx_find_end_of_memory(void)
diff -Nru a/arch/ppc/syslib/ppc85xx_setup.h b/arch/ppc/syslib/ppc85xx_setup.h
--- a/arch/ppc/syslib/ppc85xx_setup.h 2004-06-18 13:49:42 +01:00
+++ b/arch/ppc/syslib/ppc85xx_setup.h 2004-06-18 13:49:42 +01:00
@@ -53,7 +53,9 @@
#define RS_TABLE_SIZE 2
#endif
-#define BASE_BAUD 0
+#ifndef BASE_BAUD
+#define BASE_BAUD 115200
+#endif
#define STD_UART_OP(num) \
{ 0, BASE_BAUD, num, MPC85xx_IRQ_DUART, \
diff -Nru a/include/asm-ppc/mpc85xx.h b/include/asm-ppc/mpc85xx.h
--- a/include/asm-ppc/mpc85xx.h 2004-06-18 13:49:42 +01:00
+++ b/include/asm-ppc/mpc85xx.h 2004-06-18 13:49:42 +01:00
@@ -25,6 +25,9 @@
#ifdef CONFIG_MPC8540_ADS
#include <platforms/85xx/mpc8540_ads.h>
#endif
+#ifdef CONFIG_SBC8560
+#include <platforms/85xx/sbc8560.h>
+#endif
#define _IO_BASE isa_io_base
#define _ISA_MEM_BASE isa_mem_base
@@ -97,6 +100,8 @@
#define MPC85xx_ENET3_SIZE (0x01000)
#define MPC85xx_GUTS_OFFSET (0xe0000)
#define MPC85xx_GUTS_SIZE (0x01000)
+#define MPC85xx_IIC0_OFFSET (0x05000)
+#define MPC85xx_IIC0_SIZE (0x01000)
#define MPC85xx_IIC1_OFFSET (0x03000)
#define MPC85xx_IIC1_SIZE (0x01000)
#define MPC85xx_OPENPIC_OFFSET (0x40000)
--
dwmw2
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
